Samsung HPM5027 User Manual (user Manual) (ver.1.0) (English) - Page 28

Information Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. 2 Move the joystick up or down to select the "Miscellaneous", then move the joystick left or right to enter. 3 Move the joystick up or down to select the "Information", then move the joystick left or right to enter. 4 Press the Menu button to exit. Position Language Scaling Zoom/Panning Image Lock Miscellaneous English Wide Move Adjust Exit Position Language Scaling Zoom/Panning Image Lock Miscellaneous English Wide Move Adjust Exit Information Multi Control Key Lock Off Move Adjust Exit Resolution Frequency Horizontal 1024 48.3KHz Vertical 768 60Hz Exit 54 Power Saver (PC mode only) This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for details. Table 1. Power-saving modes State Normal Operation Horizontal Sync Vertical Sync Video Power Indicator Active Active Active Green Power-saving Function Mode Standby Mode Suspend Mode Power-off Mode Position A1 Position A2 Inactive Active Inactive Active Inactive Inactive Blanked Blanked Blanked Amber Blinking Amber Blinking Amber Blinking (1 sec Interval) (1 sec Interval) (1 sec Interval) Notes: • This monitor automatically returns to normal operation when horizontal and vertical sync return. • This occurs when moving the computer's mouse or pressing a key on the keyboard. • For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. 55