Samsung HW-H750 User Manual - Page 20

FUNCTIONS ●● If asked for PIN code when connecting a Bluetooth device, enter . ●● Only one Bluetooth device can be paired at a time. ●● The Bluetooth connection will be terminated when you turn the Soundbar off. ●● The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: -- If there is a strong electrical field around the Soundbar. -- If several Bluetooth devices are simultaneously paired with the Soundbar. -- If the Bluetooth device is turned off, not in place, or malfunctions. -- Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference. ●● The Soundbar supports SBC data (44.1kHz, 48kHz). ●● Connect only to a Bluetooth device that supports the A2DP (AV) function. ●● You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. ++To disconnect the Bluetooth device from the Soundbar You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual. ●● The Soundbar will be disconnected. ●● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display. ++To disconnect the Soundbar from the Bluetooth device Press the (SOURCE) button on the remote control or the ( ) button on the product's front panel to switch from BT to another mode or turn off the Soundbar. ●● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device) ●● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 16.25 ft. (5 m). ●● The Soundbar automatically turns off after 15 minutes in the Ready state. 20