Samsung HW-H750 User Manual - Page 37

MULTIROOM LINK ENG Adding a HUB An Soundbar and a HUB may not pair successfullly if the Soundbar and HUB are too far apart or are on different floors. In such cases, you can link two HUB's together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the Soundbar to the closest HUB. 1. Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second. 2. Plug in the new HUB you are using as an extender, and then press its SPK ADD button for 10 seconds. 3. The newly added HUB's LED indicators turn off and on, and it switches to Repeater mode. 4. Once the connection between the two HUB's has been established, the added HUB's ( ) indicator stops blinking. Soundbar Used as a extender HUB ●● If your smart device is not connected to the wireless router with a Wi-Fi connection, the Soundbar will not appear on the Samsung Multiroom app. ●● Place the HUB that is in Repeater mode in an appropriate location between the Soundbar and the HUB that is connected to the wireless router. ●● You can set only one HUB to Repeater mode. ●● HUB may not be commercially available depending on country or region. To purchase, contact the distributor or Samsung Service Center. Relocating the Soundbar When relocating your Soundbar, refer to the below table. Wireless router If you want to connect If you want to connect your your Soundbar to the Soundbar to a different HUB current wireless router. wireless router. Without a HUB With a HUB Turn off the Soundbar, relocate it and then turn it on. Turn off the Soundbar, relocate it, then establish the new connection as described in the installation instructions on page 30~36. Connect a LAN cable between the HUB and the new wireless router, turn on the HUB, and follow "Adding an extra Soundbar to a HUB that is connected to an Soundbar" (page 33) step. 37