Samsung HW-K550 User Manual - Page 18
Connecting the SWA-8000S (Sold Separately - no sound
View all Samsung HW-K550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTIONS ●● Before moving or installing the product, be sure to turn off the power and disconnect the power cord. ●● If the main unit is powered off,the wireless subwoofer will in standy mode and the STNDBY LED on the front will blink Red directly.(no blue LED). ●● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption. ●● The maximum transmission distance of the wireless signal between the main unit and subwoofer is about 32.8 ft, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal. ●● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set the connection between the main unit and wireless subwoofer. ●● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture. ●● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions. CONNECTING THE SWA-8000S (SOLD SEPARATELY) ●● Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately) ●● Before connecting to the Wireless Receiver Module, connect your subwoofer first. ●● Use the speaker cable to connect the wireless receiver module to the speakers. ●● Plug the power cable into a power outlet. The LED turns on. 1. While the main unit is powered off (in STANDBY mode), press and hold the (Mute) on the remote control for 5 seconds. 2. The ID SET message appears on the Soundbar's display. 3. Plug the power cord of the Wireless Receiver Module (SWA-8000S) into an AC wall outlet. 4. Turn on your Soundbar when the link indicator (Blue LED) on the SWA-8000S flickers fast. 5. When the link indicators (Blue LEDs) on your subwoofer and the SWA-8000S flash and then glow continuously, the SWA-8000S is completely connected. ●● This may take a few minutes. ●● Once connected, your Soundbar and the Wireless Receiver Module are automatically reconnected even after you turned them off and then on. 18