Samsung L210 User Manual - Page 34

Setting up the recording function using the camera buttons „ Selecting the self-timer 1. Rotate the Mode dial to select a desired RECORDING mode. 2. Press the SELF-TIMER () / RIGHT button until the desired mode indicator appears on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor. 3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed. „ Self-timer mode indicator [Selecting the 10 SEC self-timer] Icon Mode Description Suhvvlqj#wkh#vkxwwhu#exwwrq#zloo#doorz#dq#  10SEC self-timer lqwhuydo#ri#43#vhfrqgv#ehiruh#wkh#lpdjh# lv#wdnhq1  2SEC self-timer Pressing the shutter button will allow an interval of 2 seconds before the image is taken.  Double self-timer A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charging time.  Motion Timer The camera detects the subject's movement 6 seconds after pressing the Shutter button, and the picture is taken when the movement stops. „ Motion Timer Motion Pressing the Shutter button after setting the Motion Timer Detecting the subject's movement No movement is detected Icon & Self-timer lamp Blink (1 second interval) Blink (0.25 second interval) Turn on and the image is taken after 2 seconds „ The Motion Timer flows are as followings. (Movie mode excluded) Selecting the Motion Timer J Pressing the Shutter button J Confirming the composition (Within 6 sec.)*1 J Starting the detection (Swing your hands fully)*2 J Stopping the detection (Do not move) J Taking an image (after 2 sec.) *1. The camera detects the subject's movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds. *2. Move your body or hands fully. In the following cases, the Motion Timer may not operate. x The focus distance is over 3m. x The exposure is too bright or dark x In backlight conditions. x The movement is insignificant x The movement is detected beyond the center part (50%) of the sensor where the movement is recognized. x If the camera doesn`t sense any movement for 30 seconds, or the camera doesn't sense stillness after sensing movement. The detection range of Motion Timer 33