Samsung L210 User Manual - Page 41
Metering, Drive mode
UPC - 044701008989
View all Samsung L210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting up the recording function using the camera buttons Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] () : Exposure will be calculated based on an average of the available light in the image METERING area. However, the Multi calculation will be biased towards the centre of the image area. This is suitable for general use. [Spot] ( ) : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. [Center Weighted] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small objects like flowers or insects. K If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation. Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). [Single] () [Continuous] () [AEB] () : Take one picture only. : Images will be taken continuously until the shutter button is released. DRIVE Single : Take three pictures in a series in different exposures: standard exposure (0.0EV), short exposure (-1/3EV) and over exposure (+1/3EV). Use this function when you cannot determine the exposure value of subject. [Motion Capture] () : This takes 6 shots per second, and for max 5 seconds, when the shutter is pressed and held down. The maximum number of shots is 30 and the image size is fixed as VGA. 40