Samsung LN40C630K1F User Manual (user Manual) (ver.1.0) (English) - Page 47

05 Other Information Issues Solutions and Explanations Others The cable/set top box remote control does not turn the TV on or off, or adjust the volume. • Program the Cable/Sat remote control to operate the TV. Refer to Cable/Sat user manual for SAMSUNG TV code. A "Mode Not Supported" message appears. • Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution settings in this manual. Caption on TV menu is greyed out. • Caption can not be selected in the TV menu when connected via HDMI or Component. • Caption must be activated on the external device. There is a plastic smell from the TV. • This smell is normal and will dissipate over time. TV Signal information is unavailable in • This function is only available with digital channels from an Antenna / RF/Coax connection. the Self Diagnosis Test menu. (P. 22) TV is tilted to right or left side. • Remove the stand base from TV and reassemble it. The Channel menu is grey out (unavailable). • The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time TV is turned off. • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. mounting the TV to the wall, we recommend using cables with 90 degree connectors. The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product's design and is not a defect. POP (TV's internal banner ad) appears on the screen. • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup). (P. 7) ✎✎This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ¦¦ Storage and Maintenance Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. 47 English