Samsung LT-P266W User Manual (user Manual) (ver.1.0) (English) - Page 15
After you've made this connection, set the A/B switch to the A position for normal
View all Samsung LT-P266W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
I N S TA L L AT I O N 4 Connect a RF cable between the ANT OUT terminal on the cable box and the B-IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A-IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV. After you've made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box's output channel, which is usually channel 3 or 4.) English-10
English-
10
4
Connect a RF cable
between the
ANT OUT terminal
on the cable box
and the B–IN
terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the TV.
I
NSTALLATION
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)