Samsung NX58K9850SG/AA Installation Guide - Page 14
Installation requirements
View all Samsung NX58K9850SG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation requirements Location requirements Clearances and dimensions BEFORE YOU BEGIN to install this appliance, refer to the following information, dimensions, and clearances. Do not locate the range where it may be subject to strong drafts. Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for safe use of the range. The location of the electrical outlet and gas piping may be adjusted to meet the following dimensions and clearances. For installation in Canada, a free-standing range is not to be installed closer than 4.7 in (12 cm) from any adjacent surface. CAUTION This range has been designed to comply with the maximum allowable wood cabinet temperature of 194 °F (90 °C). Make sure the wall covering, countertops, and cabinets around the range can withstand the heat (up to 194 °F [90 °C]) generated by the range. If not, discoloration, delamination, or melting may occur. Side Clearance Above Cooking Surface to Wall 30 in (76.2 cm) 30 in (76.2 cm) 13 in (33 cm) Overhead Cabinet Depth 4 in (10.2 cm) 30 in (76.2 cm) 6 in 18 in (15.2 cm) (45.7 cm) 36 in (91.4 cm) 24 in (61 cm) Lower Cabinet Depth 0 in (0 cm) Clearance Below Cooking Top and at Rear and Sides of Range 23.2 in (58.9 cm) 0 in (0 cm) CAUTION Do not grasp the knob, handle and push when you install. CAUTION DO NOT install the oven so that the door is flush with the cabinet. For OTR over Gas Stove, please follow local GAS CODE. Installation requirements 14 English