Samsung PN50B430P2D User Manual (ENGLISH) - Page 36

❑ Setting Up Anynet+ The following settings help set the Anynet+ functions. T Press the TOOLS button to display Tools menu. You can also set the Anynet+ by selecting Tools → Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) ▶ Application  To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTERE button. 3. Press the ▲ or ▼ to select Setup, then press the ENTERE button. 4. Press the ENTERE button to select Anynet+ (HDMI-CEC). 5. Press the ▲ or ▼ button to select On, then press the ENTERE button. N The Anynet+ (HDMI-CEC) function is enabled. Device List Setup N If you select Off, Anynet+ (HDMI-CEC) is disabled. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Move Enter Return  Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off 1. Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Yes, then press the ENTERE button. N The Auto Turn Off function is enabled. N If you select No, the Auto Turn Off function is canceled. Setup Anynet+ (HDMI - CEC) : On Auto Turn Off : Yes Move Enter ▶ Return 3. Press the EXIT button to exit. N The active source on the TV remote must be set to TV to use the Anynet+ function. N If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off. ❑ Scanning and Switching between Anynet+ Devices 1. Press the TOOLS button. Press the ▲ or ▼ button to select Device List, then press the ENTERE button. N Anynet+ devices connected to the TV are listed. N If you cannot find a device you want, press the red button to scan for devices. 2. Press the ▲ or ▼ button to select to a particular device and press the ENTERE button. It is switched t�o��t�h�e��s�e�l�e�c�t�e�d��d�e��v�ic��e�. N Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears. View TV Device List Recording DVDR MENU DVDR INFO Receiver Setup : DVDR : On N Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. Move Enter Return N The time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed. N Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices. N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.  TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. After switching to the device, while playing a file Device with built-in Tuner After switching to the device, when you are watching a TV program Available Buttons Numeric buttons ENTERE buttons Color buttons / EXIT button (Backward search) / (Stop) / (Play) / (Forward search) (Pause) CH / CH button Audio Device When Receiver is activated VOL / VOL / MUTE button English - 36 Continued...