Samsung RF25HMEDBSG User Manual - Page 11
Removing The, Refrigerator Doors
View all Samsung RF25HMEDBSG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
01 SETTING UP REMOVING THE REFRIGERATOR DOORS For some installations, you need to remove the fridge doors and freezer drawer so you can move the refrigerator to its final location. Do not remove the doors/drawers if you don't need to. If you do not need to remove the refrigerator doors or drawers, go to 'Adjusting the Level' on page 14. If you need to remove the doors and drawers. continue below. Before removing the doors or drawers, make sure you read the following warnings: WARNING Disconnect power to the refrigerator before removing the door or drawer. • Be careful not to drop, damage, or scratch the doors/drawer while removing them. • Be careful not to injure yourself while removing the doors/drawer. • Reattach the doors/drawer properly to avoid: - Moisture from air leakage. - Uneven door alignment. - Wasting energy due to improper door seal. 2. Disconnect the two connectors ( 2 ) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler. CAUTION If a red clip is on the coupler, you must remove it before removing the tube. 2 Red Clip (1/4") 3 4 3. Pull and remove the hinge lever ( 5 ). Remove the ground screw ( 6 ) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 7 ). WARNING 5 6 Disassembling the refrigerator doors 7 Be careful not to drop and scratch the doors while removing them. With the door opened 1. Remove the 3 screws holding down the TOP TABLE ( 1 ) and separate the connected wires. 4. Lift the door straight up to remove. 1 DA68-02601G-00.indb 11 English - 11 2014. 12. 4. �� 3:05