Samsung RF25HMEDBSG User Manual - Page 35

English - 35

Page 35 highlights

03 Troubleshooting PROBLEM SOLUTION Frost forms on the walls of the freezer. • Is the air vent blocked? Remove any obstructions so air can circulate freely. • Allow sufficient space between the stored foods for efficient air circulation. • Is the freezer drawer closed properly? Water dispenser is not functioning. • Is the water line connected and the shut-off valve opened? • Has the water supply line tubing been crushed or kinked? • Make sure the tubing is free and clear of any obstruction. • Is the water tank frozen because the fridge temperature is too low? Try selecting a warmer setting on the Digital display. • Check if the filter is properly installed. If it is not properly installed, the water dispenser may not work Auto close system does not work with the freezer door. • Is there an imbalance between the right and left parts of the door? • Open and close the door smoothly 1~2 times. After you do this, the auto close system usually works properly again. • Try opening the door smoothly to avoid unbalancing the right and the left part of the door. Condensation or water drops forms on vertical mullion and surroundings, etc. • Condensation or water drops may form if the humidity is too high while the refrigerator is operating. • If condensation or water drops appears on vertical mullion and surroundings, etc., turn the Energy Saver mode off after removing the condensation. (See the explanation of the Energy Saver button in "Using the Control Panel" on page 18.) DA68-02601G-00.indb 35 English - 35 2014. 12. 4. �� 3:06

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

English - 35
03 TROUBLESHOOTING
PROBLEM
SOLUTION
Frost forms on
the walls of the
freezer.
Is the air vent blocked?
Remove any obstructions so air can circulate freely.
Allow sufficient space between the stored foods for efficient air circulation.
Is the freezer drawer closed properly?
Water dispenser is
not functioning.
Is the water line connected and the shut-off valve opened?
Has the water supply line tubing been crushed or kinked?
Make sure the tubing is free and clear of any obstruction.
Is the water tank frozen because the fridge temperature is too low?
Try selecting a warmer setting on the Digital display.
Check if
the filter is properly installed. If it is not properly installed, the water
dispenser may not work
Auto close system
does not work with
the freezer door.
Is there an imbalance between the right and left parts of the door?
Open and close the door smoothly 1~2 times.
After you do this, the auto close system usually works properly again.
Try opening the door smoothly to avoid unbalancing the right and the left part of the
door.
Condensation or
water drops forms
on vertical mullion
and surroundings,
etc.
Condensation or water drops may form if the humidity is too high while the
refrigerator is operating.
If condensation or water drops appears on vertical mullion and surroundings, etc.,
turn the Energy Saver mode off after removing the condensation.
(See the explanation of the Energy Saver button in “Using the Control Panel” on
page 18.)
DA68-02601G-00.indb
35
2014. 12. 4.
�� 3:06