Samsung RS2630WW Quick Guide (easy Manual) (ver.1.0) (English) - Page 22

ADJUSTING THE HEIGHT BETWEEN THE DOORS Making small level adjustments between doors. If the freezer door is lower than the refrigerator door. If the freezer door is higher than the refrigerator door. Adjustment location Please open the doors and adjust the doors as follows: 1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁). Adjustment location When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counterNOTE clockwise. Loosen the nut(①) with your finger. ➁ BOLT ➂ WRENCH ➀ NUT 2) Please adjust the height difference between the doors turning the bolt (➁) clockwise( ( ). When you turn clockwise ( NOTE ), the door goes up. ➁ BOLT ➂ WRENCH ) or counter clockwise ➀ NUT 3) After adjusting the doors, turn the nut (①) clockwise( bolt again with the wrench (➂) to fix the nut(①). ➁ BOLT ) until the lower end of the bolt, then tighten the ➂ WRENCH ➀ NUT If you do not fix the nut (①)firmly, the bolt (➁) may be released. NOTE 22