Samsung SHR-5082-250 User Manual - Page 32
Monitoring
UPC - 836164369079
View all Samsung SHR-5082-250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PTZ Device You can configure the PTZ device related settings. PTZ Device Cam ID Protocol 1 000n None 2 001 None 3 002 None 4 003 None 5 004 None 6 005 None 7 006 None 8 007 None Serial Mode : Half Duplex Baudrate Parity Data Stop 9600 None 8 1 9600 None 8 1 9600 None 8 1 9600 None 8 1 9600 None 8 1 9600 None 8 1 9600 None 8 1 9600 None 8 1 9-16 OK Cancel ID ID for PTZ camera. It can have any number among 0 to 255. Protocol Protocol that is supported by the PTZ device. Available protocols are Samsung, Vic., Pan., AD, Phi., Ern., Pel-D, Pel-P, Vcl., Dia., Kal., and Tech. Baudrate Available baud rates are 600, 1200, 2400, 4800, 9600, 19200, and 38400. Parity Select one of None, Even, and Odd. Data Select 7 or 8 for data bit. Stop Select 1 or 2 for stop bit. Serial Mode Select Half Duplex or Full Duplex for data exchanging method. In case of SHR-5082/5080, only 8 channels are displayed. The above setting values must be the CAUTION same as the ones of the PTZ device. For more details, please refer to the user manual for the PTZ device. Screen Setup It is used to set the brightness, contrast, and color for the camera image of each channel. Brightness 050 Contrast 050 Color 050 Default Exit Place the cursor on the channel that you want to set the values for brightness, contrast, and color. When a channel is selected, its image appears on the right. For selection, press the ENTER button. Use the UP/DOWN direction buttons to change the value from 0 to 100. When Default is selected, the value 50 is to be assigned for each item of the selected channel. In case of SHR-5082/5080, only 8 channels are displayed. MONITORING You can configure the monitoring-related settings. Monitoring Event Monitoring OSG Display Spot Out Channel Spot Out Event Monitor Monitor Out PB Channel Position Multi Channel Seq. Duration Off Date On Time On Title On Status On CH1 Off Dual Out Right Down 5sec OK Cancel Event Monitoring You can select any of Off, 3sec, 5sec, 10sec, 20sec, 30sec, and Continuous. - Off: Event monitoring does not work. - 3sec, 5sec, 10sec, 20sec, and 30sec: Sets the screen duration period in the Auto Sequence (or auto sequence) mode. - Continuous: The event monitoring screen remains alive until you press the ALARM button. 28_ menu setup