Samsung SHR-6042 User Manual - Page 21
Caution, Live screen modes, V.Loss / V.Off : Video Input Status - password
UPC - 836164370297
View all Samsung SHR-6042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
: Record Lock Icon It indicates that the record lock is activated. This icon appears when you are recording video images while the record lock is set. To cancel the recording, enter the preset password. : PTZ Icon The channel that the PTZ function has been set shows the PTZ icon. It is changed to yellow when the PTZ function is now active. : Audio Icon This icon indicates the Audio On/Off state and if it is turned on, the icon is changed to yellow. This icon does not appear when the Video or Audio is disabled. : Alarm In Icon It appears when an event from the Alarm In is detected. : Motion Icon It appears when a motion event occurs. : Zoom Icon The Zoom icon appears when Zoom In is active and disappears when inactive. : Freeze Icon It appears when the Freeze function is active and disappears when it is cancelled. : Insufficient HDD Space Icon It appears when the HDD writing space is not enough. : locked Icon It appears when the HDD is inferior goods. : Screen Switching Icon It appears when it is in the screen switching mode. V.Loss / V.Off : Video Input Status If no video inputs are detected even when the Video Setup is set to On, the [V.Loss] icon appears on the corresponding channel; and the channel that the Video Setup is set to Off shows the [V.Off] icon. OSD Position Control Function Caution It is possible to CH1, CH3 and control OSD position of CH4 on live screen by Up/ Down/Left/Right buttons when in quad division mode. Live screen modes After taking 4 live video inputs, images are displayed in the following 3 modes. CAM_01 CAM_02 CAM_03 CAM_04 < 4 Split > CAM_01 CAM_02 < PIP > < Auto Sequence > 4 Split Mode: It shows 4 video channels on the respective split screens. PIP (Picture in Picture): The 1/4-sized small screen appears on the full screen. The channels for both full and small screens can be arbitrarily selected. The location of PIP screen can be set to any of 5 locations within the full screen by using the or button. Auto Sequence Mode: Multiple channels are sequentially displayed on the full screen at the preset interval. live _17 04 live