Samsung SHR-6042 User Manual - Page 59
Camera, PTZ Device Settings
UPC - 836164370297
View all Samsung SHR-6042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
09 appendix Camera Camera Settings The Camera tab contains camera enable/disable and video source brightness, contrast, and color options. This tab also contains camera security options. Select a camera you wish to configure from the server list located on the right side of the screen. 2 3 1 4 5 6 7 1. Camera: Select the camera channel you wish to configure. 2. Name: Enter the name of the selected camera's zone. 3. Video: Enable/disable the selected camera. 4. Screen Conversion: Set the screen conversion time. 5. Video Settings: Adjust the source signal's brightness, contrast, and color levels. 6. Apply to All: Use this feature to apply the selected camera's video settings to all or a designated group of cameras. 7. Reset: Resets brightness, contrast, and color levels to their default settings. 8. Screen: Displays the selected camera's video feed. It's possible to view video settings adjustments in real-time. - Adjusting video settings does not correct improperly recorded video clips; therefore, it's important that both the camera and the monitor are properly calibrated before recording video. PTZ Device Settings Your DVR system supports remote control of external devices such as a PTZ or a Speed Dome. Before using this feature, however, you will first need to connect the external device to the system via the RS485 port and configure the connected external device. 2 3 1 4 5 1. Camera: Displays configured camera channels. 2. Enable/Disable: Enables/disables the configured camera's PTZ feature. 3. ID: Designate an ID for the configured PTZ. 4. Protocol: Designate the communication protocol you wish to use with the configured PTZ or Speed Dome. 5. Baud Rate: Designate the baud rate for the configured PTZ. Remote Control Device This tab is used to configure the ID and baud rate for remote control devices. appendix _55