Samsung WF405ATPASU/AA User Manual Ver.1.0 (English, French, Spanish) - Page 29

Cleaning The Debris Filter

Page 29 highlights

04 maintaining your washer CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed. 1. Open the filter cover by pressing and then pulling the handle of the filter cover with your finger. 2. Holding the drain cap, pull the drain tube that is hooked on the guide hook to the front. Do not pull the drain tube with excessive force. 3. Place a bowl under the washing machine to catch any remaining water. Then, hold the drain tube with one hand, and turn the drain cap counter clockwise with the other hand to separate it from the drain tube. 4. Drain the remaining water completely. Step 1 Drain cap 5. Turn the debris cap counterclockwise, and then pull the debris cap and debris filter assembly out of the Debris filter cap washer. Step 2 6. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked. Debris filter cap 7. When you have finished cleaning the filter, insert the debris cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o'clock position, pointing to the indicator on the washer. 8. Re-attach the emergency drain cap to the drain tube, and then hook the tube to the hook guide. 9. Re-install the filter cover. Debris filter WF405ATPA-03145A-02_EN.indd 29 maintaining your washer _29 2012-03-12 3:07:27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

maintaining your washer
_29
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.
1.
Open the filter cover by pressing and then pulling the handle of
the filter cover with your finger.
2.
Holding the drain cap, pull the drain tube that
is hooked on the guide hook to the front. Do
not pull the drain tube with excessive force.
3.
Place a bowl under the washing machine to
catch any remaining water. Then, hold the
drain tube with one hand, and turn the drain
cap counter clockwise with the other hand to
separate it from the drain tube.
4.
Drain the remaining water completely.
5.
Turn the debris cap counterclockwise, and then pull
the debris cap and debris filter assembly out of the
washer.
6.
Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
7.
When you have finished cleaning the filter, insert the debris
cap and filter assembly back into the washer. Turn the
debris filter cap clockwise until the indicator on the debris
filter cap is in the 12 o’clock position, pointing to the
indicator on the washer.
8.
Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
9.
Re-install the filter cover.
04 maintaining your washer
Debris filter cap
Step 2
Step 1
Drain cap
Debris filter cap
Debris filter
WF405ATPA-03145A-02_EN.indd 29
WF405ATPA-03145A-02_EN.indd
29
2012-03-12
3:07:27
2012-03-12
3:07:27