Samsung WF405ATPASU/AA Trouble Shooting Guide User Manual Ver.1.0 (English, Fr - Page 20

Problem Checking And Method Of Pcb, Warning

Get Samsung WF405ATPASU/AA PDF manuals and user guides View all Samsung WF405ATPASU/AA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

TROUBLE SHOOTING WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. PROBLEM CHECKING AND METHOD OF PCB - If you plug in the power cord and turn Power S/W on, memorized data is displayed. If any data is not displayed, check the followings. Hall Sensor Check Check Voltage at Pin #4 and #3 of CN3 Tester Check = DC 0V or 1.3V Check Voltage at Pin #4 and #2 of CN3 Tester Check = DC 0V or 1.3V Motor Check Resistance at Pin #1 of #2 of CN5 = 12٠Resistance at Pin #2 of #3 of CN5 = 12٠Resistance at Pin #3 of #3 of CN5 = 12٠Door Lock Check Check AC Voltage at Pin #1 of CN6 and Pin #2 of CN6 When Door Lock = AC 120V Drain Motor Check Check Voltage at Pin #1 of RY1 and Pin #3 of CN1 When Drain Pump operates = AC 120V Water Valve Check Check Voltage at Pin #1 of RY1 and Pin #6,7,8,9,10 of CN1 When Each Valve operates = AC 120V AC Power Check Check Voltage at Pin #1 of CN6 and #1 of RY1 When Set Power On = AC 120V WASH Heater Relay Check Check Voltage at Pin #1 of RY1 and Pin #2 of RY13 When Wash Heater Relay operates = AC 120V 20 WF405ATP-03144A_EN.indd 20 2012-03-02 �� 9:28:56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
20
Hall Sensor Check
Check Voltage at Pin #4 and #3 of CN3
Tester Check = DC 0V or 1.3V
Check Voltage at Pin #4 and #2 of CN3
Tester Check = DC 0V or 1.3V
Motor Check
Resistance at Pin #1 of #2 of CN5 = 12Ω
Resistance at Pin #2 of #3 of CN5 = 12Ω
Resistance at Pin #3 of #3 of CN5 = 12Ω
Door Lock Check
Check AC Voltage at Pin #1 of CN6 and Pin #2
of CN6
When Door Lock = AC 120V
Drain Motor Check
Check Voltage at Pin #1 of RY1 and Pin #3 of CN1
When Drain Pump operates = AC 120V
Water Valve Check
Check Voltage at Pin #1 of RY1 and Pin
#6,7,8,9,10 of CN1
When Each Valve operates = AC 120V
AC Power Check
Check Voltage at Pin #1 of CN6 and #1 of RY1
When Set Power On
= AC 120V
WASH Heater Relay Check
Check Voltage at Pin #1 of RY1 and Pin #2 of RY13
When Wash Heater Relay operates = AC 120V
PROBLEM CHECKING AND METHOD OF PCB
-
If you plug in the power cord and turn Power S/W on, memorized data is displayed.
If any data is not displayed, check the followings.
TROUBLE SHOOTING
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
WF405ATP-03144A_EN.indd
20
2012-03-02
�� 9:28:56