Sanyo CE42LM4WPN-NA Owner's manual - Page 2

SAFETY PRECAUTIONS & SERVICING CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing. Installation harmful effect on the lifetime of the panel. WARNING: To prevent injury the LCD monitor must be securely fixed in accordance with the manufacturers mounting installation instructions. This monitor must NOT be permanently mounted to the building structure. It must be mounted in such a way that it can be removed using basic tools. The power supply cord must NOT be attached to the building surface. The power supply cord must NOT be routed through walls, ceiling, floors, or other similar openings in the building structure. The power supply cord MUST be positioned so as to prevent physical damage. Do not allow anything to rest on the power cord. Do not locate this LCD monitor where the cord will be damaged by people walking on it. A suitable socket outlet must be provided near to the monitor and shall be easily accessible. Do not overload wall outlets as this can result in fire or electric shock. This LCD monitor should not be built in to any structure or enclosed in any way. Heat build up will reduce the life of the monitor. Always mount using recommended and substantial fixtures and fittings. Do not place this LCD monitor near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers). Do not place your LCD monitor on an unstable stand, shelf or table. Serious injury to an individual, and damage to the LCD monitor may result if it should fall. Your sales person can recommend approved wall mounting kit. A special wall mounting kit is available for this model. This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating Instructions. If you are not sure of the type of power supply, consult your sales person or your local power company This LCD monitor should have a minimum distance of 5cm away from the wall and the monitor should have 10cm distance around the top and sides 10cm 10cm 10cm 5cm Servicing Your LCD monitor is fully transistorised and does not contain any user serviceable components. You must not remove the rear cover of the LCD monitor by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards. Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: ■ If the power cord or plug is damaged. ■ If the has been dropped or the cabinet has been damaged. ■ If the LCD monitor exhibits a distinct change in performance. ■ If the LCD monitor does not operate normally by following the operating instructions. For added protection it is strongly recommended that this LCD Use monitor is supplied via an approved earth fault protection device This monitor is not protected against temporary or continuous immersion in liquid. This monitor is tested to IP56 (Category 2) standard rating. Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor from the wall socket. Do not mount near an open flame source. Open flames must never be used near this LCD monitor. Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor. Use a damp cloth for cleaning. The rear finned section around the cabinet functions as a heat sink, removing heat away from the monitor. The external surface of the cabinet (finned area) must not be covered or the airflow resricted in anyway by enclosing the LCD monitor The operating temperature range of this monitor can be used at 32°F ~ 104°F. It is not recommended to install the screen in direct sunlight without adequate shading, as this will cause the temperature of the panel to rise above the maximum specified. Doing so may cause a black shadow to appear on the screen, which will disappear when the screen temperature returns to within the specification. This "of course" does not produce any 2 Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the LCD monitor to normal operation.