Sanyo DP32648 Owners Manual - Page 9
Getting Started-power Connection / Channel Search - screen
View all Sanyo DP32648 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
GETTING STARTED-POWER CONNECTION / CHANNEL SEARCH POWER CONNECTION 5 Plug in AC power cord (120V AC, 60 Hz). 6 Press the POWER key. (Follow the on-screen instructions.) To 120V AC outlet. INITIAL CHANNEL SEARCH 7 Press the CHANNEL L (Up) key to search for signals connected to the Antenna terminal. Channel Search will check for Antenna and Cable signals. If Antenna signals are detected, the HDTV searches for both analog and digital off-air channels. If Cable signals are detected, the HDTV will search for analog Cable channels. Channels are stored in Channel Memory and can be scanned using the CHANNEL L (Up) and M (Down) keys. If no Antenna signals are detected, the HDTV will begin an AV search. If neither of these searches detected a valid signal, the HDTV will tune to input Video1. CHANNEL SEARCH DISPLAY AV SEARCH NOTE:Be sure all the external video devices you connected to the HDTV are powered ON before you begin an AV Search. 8 Press the CHANNEL M (Down) key to search for signals from devices you connected to the AV input jacks (Initial Display). AV Search will begin checking the AV inputs for valid signals, beginning with input Video1. When a valid signal is detected, the search process ends and the HDTV tunes to that input source. If a valid signal is not detected on any of the AV inputs, the HDTV will tune to input Video1. INITIAL DISPLAY AV SIGNAL SEARCH DISPLAY Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032 9