Sanyo DVD-SL33 Instruction Manual - Page 10
Using RF Modulator
View all Sanyo DVD-SL33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Using RF Modulator If your TV does not have a Video input jack and has an antenna terminal only, please purchase the *RF Modulator (not supplied). (*Please consult your audio/video dealer.) Example: DVD video player, TV and RF Modulator connections Audio/Video cable (supplied) To AUDIO OUT jacks 3 To audio input jacks To AC 120V, 1 60Hz (Red) R (White) L To VIDEO OUT jack (Yellow) To video input jack (Yellow) (Red) R (White) L TV A/V INPUT JACKS TO TV ANT. IN CHANNEL VIDEO RF Modulator DVD video player 1. Connect the antenna cable (not supplied) to the ANT. IN terminal of the RF Modulator. 2. Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV. 3. Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT jacks of the DVD video player and the AUDIO INPUT and VIDEO INPUT jacks of the RF Modulator. R-AUDIO-L 34 4 2 VHF/UHF ANTENNA IN 4. Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on both TV and RF Modulator, whichever is not used for regular broadcast in your area. Note: For more details, please refer to the instruction manual of the RF Modulator. Example: DVD video player, VCR, TV and RF Modulator connections Audio/Video cable (supplied) To AUDIO OUT jacks To audio input 4 jacks To AC 120V, 1 60Hz (Red) R (White) L To VIDEO OUT jack (Yellow) To video input jack (Yellow) (Red) R (White) L RF Modulator DVD video player TV A/V INPUT JACKS TO TV 2 ANT. IN CHANNEL VIDEO R-AUDIO-L 34 5 VHF/UHF ANTENNA IN 3 VHF/UHF FROM ANT. IN 34 TO TV OUT 5 CHANNEL 1. Connect the antenna cable (not supplied) to the VHF/UHF FROM ANT IN terminal of the VCR. 2. Connect the 75-ohm coaxial cable (not supplied) between the TO TV OUT terminal of the VCR and the ANT. IN terminal of the RF Modulator. 3. Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV. VCR 4. Connect the Audio/Video cable (supplied) between the AUDIO OUT and VIDEO OUT jacks of the DVD video player and the AUDIO INPUT and VIDEO INPUT jacks of the RF Modulator. 5. Turn on the TV, and set the channel number (CHANNEL3 or CHANNEL4) on all TV, VCR and RF Modulator, whichever is not used for regular broadcasts in your area. Note: For more details, please refer to the instruction manual of the RF Modulator. -E9- DVD-SL33/CA(English) 10 13/06/2003, 10:06