Sanyo FVDC1 Instruction Manual - Page 140
Selecting the image tyo play back, <Resetting the remote control code to RC CODE 1>
UPC - 086483049286
View all Sanyo FVDC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
DOCKING STATION 1 Aim the infrared emitter at the remote control sensor on the docking station. 2 Hold down the CH button and press the [J] button for about 3 seconds. Select the image to play back. 1 Connect the docking station to a TV, and set the camera in the docking station. 2 Press the CAMERA/CHARGE button to turn on the camera lamp. CAMERA/CHARGE button Camera indicator 3 Set the TV input switch to VIDEO input. e If the camera is set to the playback mode, the Playback Screen appears on the TV monitor. The playback method is the same as when viewing images on the LCD monitor. 137 English
137
English
DOCKING STATION
<Resetting the remote control code to “RC CODE 1”>
1
Aim the infrared emitter at the remote control sensor on the docking
station.
2
Hold down the CH button and press the [
J
] button for about 3
seconds.
Select the image to play back.
1
Connect the docking station to a TV, and set the camera in the
docking station.
2
Press the CAMERA/CHARGE button to turn on the camera lamp.
3
Set the TV input switch to VIDEO input.
e
If the camera is set to the playback mode, the Playback Screen
appears on the TV monitor. The playback method is the same as when
viewing images on the LCD monitor.
CAMERA/CHARGE button
Camera indicator