Sanyo FVDC1 Instruction Manual - Page 42
Turning off the camera, To immediately activate the power save function, About the standby mode
UPC - 086483049286
View all Sanyo FVDC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TURNING THE POWER ON AND OFF Turning off the camera 1 Press the ON/OFF button for about 1 second. e The camera turns off. HINT To immediately activate the power save function e Press the ON/OFF button briefly to active the power save function. About the standby mode e To turn off the camera only briefly, you can close the monitor unit to put the camera in the standby mode. The standby mode uses almost no power. When the monitor unit is opened again, the camera turns on immediately and you are ready to shoot or view images without any delay. Note If the } icon appears... e When a picture is taken, the date and time it was captured is recorded with it. When the date and time cannot be recorded with the image because the date and time have not yet been set (page 114), the } icon appears. To have the date and time recorded with images, please make this setting before capturing images. 39 English