Sanyo FVDC1 Instruction Manual - Page 53

Note About the target mark e The target mark indicates the position which is currently focused. If the target mark does not appear, or if it appears at a position that is different from the point you wish to focus, you can refocus, for example, by changing the shooting angle. e The large target mark appears when the camera focuses on a wide area in the center of the screen. HINT Shoot a still image while recording a video clip e If you press the still image shooting button while recording a video clip, the frame is also saved as a still image. Note, however, that in this case the flash will not operate. e If the still image resolution is set to a setting other than [, and you press the still image shooting button while recording a video clip, the displayed image stops briefly and then returns to video clip recording after the still image is captured. Note e The data for a video clip is very large. Therefore, be aware that if the video clip is uploaded to a computer to be played back, the computer may not be able to play back the video fast enough, making it appear jerky. (The video will always be displayed properly on the LCD monitor or a television.) e Depending on the card, shooting may end even before the possible shooting time indicated on page 167. English 50