Sanyo FVDC1 Instruction Manual - Page 38
Installing the battery pack and card, Install the battery pack
UPC - 086483049286
View all Sanyo FVDC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
INSTALLING THE BATTERY PACK AND CARD The card can be used after it has been formatted with the camera (page 122). Make sure that the battery pack polarity (+ and -) and the card orientation are correct. Install the battery pack 1 Open the battery cover on the side. e Open the battery cover by lightly pressing it and sliding it towards the rear. 2 Insert the battery pack. e Firmly push it all the way in. e Match the [I] mark on the battery with the [I] mark on the camera. e Raise the battery pack and pull it out. 35 English
35
English
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 122).
Make sure that the battery pack polarity (+ and
–
) and the card orientation are
correct.
Install the battery pack
1
Open the battery cover on the side.
e
Open the battery cover by lightly
pressing it and sliding it towards
the rear.
2
Insert the battery pack.
e
Firmly push it all the way in.
e
Match the [
I
] mark on the battery
with the [
I
] mark on the camera.
<To remove the battery pack>
e
Raise the battery pack and pull it
out.