Sanyo PLC-XK2200 RS232 Basic - Page 11

PLC-XK2200 / 2600 / XK3010 Basic Serial Command Specifications 6.5. POWER ON Command Command "C00" [CR] Detail Power ON When already Power is ON, nothing is done. When sending this command during processing Countdown, Countdown is terminated. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.6. POWER OFF Command (Quick Power OFF) Command "C01" [CR] Detail Power OFF (Standby) When Power is OFF with ON/STAND-BY button of the projector and remote control, "Power OFF?" is displayed. However, as soon as this command is sent, Quick Power OFF is executed. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.7. POWER OFF Command Command "C02" [CR] Detail Power OFF (Standby). The command operates the same Power OFF function as ON/STAND-BY button of the projector and remote control. Once this command is sent, "Power OFF?" is displayed. If this command is sent again while it is displayed, Power OFF is executed. When sending this command during Countdown, Countdown is terminated. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.8. Computer 1 Command Command "C05" [CR] Detail Select Computer 1 Input Although projector returns "OK", Input search is not executed with this command while Input search is set to On1 or On2, Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.9. Computer 2 Command Command "C06" [CR] Detail Select Computer2 Input Note 1) Although projector returns "OK", Input search is not executed with this command while Input search is set to On1 or On2, Note 2) When "Monitor out" is selected in Terminal menu, projector returns "OK" and displays "Monitor out" on the screen. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 10/23