Sanyo PLC-XK2200 RS232 Basic - Page 4
Overview, Serial Interface Specifications, 1. Transfer Specifications, 2. Connection, Projector, COM
UPC - 086483079498
View all Sanyo PLC-XK2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PLC-XK2200 / 2600 / XK3010 Basic Serial Command Specifications 1. Overview 1.1. These specifications define projector control commands for PLC-XK2200/2600/ XK3010. 1.2. The projector control commands are used to remotely control a projector through RS-232C from a computer. 2. Serial Interface Specifications 2.1. Transfer Specifications Item Specifications Synchronous system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity N/A Stop Bit 1 Flow Control N/A 1) Transmission speed: initial setting value is 19200. 2) Transmission speed can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for connection to a computer and a projector. PC COM 1 Projector Control Port (D-Sub 9 Pin) (D-Sub 9 Pin) 3/23