Sanyo PLC-XK2200 RS232 Basic - Page 19
PRESENTATION TIMER Exit Command
UPC - 086483079498
View all Sanyo PLC-XK2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PLC-XK2200 / 2600 / XK3010 Basic Serial Command Specifications 6.52. Computer 1 Component Command Command "C54" [CR] Detail Select Component input in Computer 1. Although projector returns "OK", Input search is not executed with this command while Input search is set to On1 or On2, Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.53. AUTO PC ADJ. Command Command "C89" [CR] Detail Execute Auto PC Adj. function. This command operates the same as "AUTO PC ADJ." of main menu. Projector suspends Auto PC Adj. operation when receiving this command another time. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.54. PRESENTATION TIMER Command Command "C8A" [CR] Detail Execute Presentation Timer. This command works the same way as "P-TIMER" button of the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.55. PRESENTATION TIMER (Exit) Command Command "C8B" [CR] Detail Exit Presentation Timer menu. This command works the same as holding on the "P-TIMER" button of the remote control Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.56. KEYSTONE ↑Command Command "C8E" [CR] Detail Correct keystone distortion by reducing upper part of image. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.57. KEYSTONE ↓Command Command "C8F" [CR] Detail Correct keystone distortion by reducing down part of image. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 18/23