Sanyo PLC-XW200 Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Foot
View all Sanyo PLC-XW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. A:B = 6:1 38.7'(11.80m) 32.3'(9.84m) 21.5'(6.55m) 16.1'(4.90m) 10.7'(3.26m) 4.3'(1.30m) 100" 40" 83 150" 125 200" 167 300"(wide) Max. Zoom (Inch Diagonal) 300"(tele ) Min. Zoom 250 A (Center) B Screen Size (W x H) mm 4 : 3 aspect ratio Zoom (max) Zoom (min) 40" 813 x 610 4.3'(1.30m) 5.1'(1.55m) 100" 2032 x 1524 10.7'(3.26m) 12.9'(3.92m) 150" 3048 x 2286 16.1'(4.90m) 19.4'(5.90m) 200" 4064 x 3048 21.5'(6.55m) 25.8(7.87m) 300" 6096 x 4572 32.3'(9.84m) 38.7'(11.80m) Adjustable Foot Projection angle can be adjusted up to 10.0 degrees with the adjustable foot. Lift the front of the projector and push the foot lock latch on the projector. Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt. To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch. Keystone distortion of the projected image can be corrected by menu operation.(see pages 23, 44-45) Foot Lock Latch Adjustable Foot 13