Sanyo PLC-XW200 Owners Manual - Page 55
Fan control, Lamp counter, Lamp counter reset
View all Sanyo PLC-XW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Fan This function provides the following options in the cooling fans' operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan control This projector provides Fan control function in the Setting menu. Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off Normal speed. Set this function to Off when using the projector in non-high altitude environment. On1 Faster than Off mode. Select this mode when using the projector in high altitudes (about 1,000 meters to 2,000 meters above the sea level) where the fans have less cooling effect. On2 Faster than On1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level) where the fans have lesser cooling effect. Note: The fan noise becomes louder in On1 and On2. Lamp counter Be sure to reset the Lamp replacement counter after the lamp is replaced. (p. 61) Press the Point ▲▼ buttons to choose the Lamp counter function and then press the Point ► or the SELECT button to access the submenu items. Lamp counter This item shows the total accumulated time of the lamp usage. Lamp counter reset.......Press the the SELECT button to choose Lamp counter reset . Select yes in the confirmation box if you want to reset the lamp counter, and then choose yes in the second confirmation box to reset lamp counter. Lamp counter reset Setting 55