Sanyo PLV 80 Owners Manual - Page 25
Computer Input, Select Computer System Manually, Automatic Multi-scan System - projector user manual
UPC - 086483059254
View all Sanyo PLV 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
COMPUTER INPUT WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connect a computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to INPUT Menu icon. INPUT MENU Input Input 1 Input 2 Input 3 2 Press POINT UP/DOWN buttons to move a red arrow pointer to Input 2 and then press SELECT button. Source Select Menu will appear. Input 2 SVGA1 INPUT Menu icon Move a pointer (red arrow) to Input 2 and press SELECT button. 3 Press POINT UP/DOWN buttons and a red-arrow icon will appear. Move arrow to "RGB", and then press SELECT button. NOTE; INPUT SOURCE changes if the INPUT 2 button on Remote Control Unit is pressed. Source Select Menu Move a pointer (red arrow) to RGB and press SELECT button. AUTOMATIC MULTI-SCAN SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, WXGA or UXGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on pages 52-53). When a computer is selected, this projector automatically tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set manually.) The projector displays one of the Auto, -----, Mode 1/2/3/4/5/6/7/8/9/10, or the system provided in the projector. Auto ---- When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment function operates to adjust projector and message "Auto" is displayed on SYSTEM Menu icon. When image is not provided properly, manual adjustment is required. (Refer to P27 and 28.) There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 48.) PC SYSTEM MENU System Mode 1 PC SYSTEM Menu icon Displays system being selected. Mode 1 User preset adjustment in MANUAL PC ADJUSTMENT. Adjustment data can be stored in the Mode 1-10. SVGA 1 Computer systems provided in the projector. The projector chooses proper system and displays it. ✽ Mode 1 and SVGA 1 are examples. SELECT COMPUTER SYSTEM MANUALLY This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to PC SYSTEM Menu icon. 2 Press POINT UP/DOWN buttons to move a red arrow pointer to system that you want to set, and then press SELECT button. PC SYSTEM MENU System Mode 1 Mode 2 SVGA 1 SVGA 2 SVGA 3 Mode 1 PC SYSTEM Menu icon Displays system being selected. Systems on this dialog box can be selected. Custom Mode (1~10) set in PC ADJUST Menu. (P27, 28) 25