Sanyo PLV 80 Owners Manual - Page 27

COMPUTER INPUT MANUAL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 10 independent memory areas to memorize those parameters manually adjusted. This enables you to recall setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be operated when in digital signal input on DVI terminal is selected on PC SYSTEM MENU (P24). 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to PC ADJUST Menu icon. PC ADJUST MENU Auto PC adj. SVGA1 2 Press POINT UP/DOWN buttons to move a red frame pointer to item that you want to adjust and then press SELECT button. Adjustment dialog box will appear. Press POINT LEFT/RIGHT buttons to adjust value. PC ADJUST Menu icon Move a red frame pointer to item and press SELECT button. Fine sync Adjusts an image as necessary to eliminate flicker from display. Press POINT LEFT/RIGHT buttons to adjust value. (From 0 to 31.) Total dots Adjust the number of total dots in one horizontal period. Press POINT LEFT/RIGHT buttons and adjust number to match your PC image. Position H Adjusts horizontal picture position. Press POINT LEFT/RIGHT buttons to adjust position. Position V Adjusts vertical picture position. Press POINT LEFT/RIGHT button(s) to adjust position. Current mode Press SELECT button to show information of computer selected. Clamp Adjusts clamp position. When image has a dark bar(s), try this adjustment. Fine sync Mode 1 Stored Shows status (Stored / Free) of selected Mode. Selected Mode Press POINT LEFT/RIGHT buttons to adjust value. Press SELECT button at this icon to adjust "Clamp," "Display area H" or set "Display area V." Current mode Display area H Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIGHT buttons to decrease/increase value and then press SELECT button. Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT buttons to decrease/increase value and then press SELECT button. Press SELECT button at Current mode icon to show information of computer connected. Press SELECT button at this icon to display previous items. 27