Sanyo PLV 80 Owners Manual - Page 36

PICTURE IMAGE 4 To move a red frame pointer to "MENU", and then press the SELECT button. The COLOR MANAGEMENT menu will be exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal projection will resume.) After changing the COLOR MANAGEMENT settings, use the IMAGE ADJUST menu to store the changed settings. COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. COLOR SELECTION MODE COLOR M. The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.) MENU The COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" using the POINT buttons and change to the next mode (LIST mode). LIST LIST MODE COLOR M. MENU COLOR PALETTE LIST MODE DEL The check mark will be cleared and the effect of the setting adjustment for that line on the projected images will be momentarily canceled. COLOR PALETTE The mode will return to COLOR SELECTION mode so that you can re-adjust the setting for the color in that line. This option is not available if the check mark has been cleared by the operation immediately above.) DEL The setting adjustment for the color in that line will be canceled. ALL DEL The setting adjustment for the colors in all lines will be canceled. COLOR M. The mode will return to POINTER mode. ALL DEL MENU COLOR M. NOTE; If you press the COLOR M. button on the remote control, the COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "MENU" using the POINT buttons and store the settings. Auto picture control Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2) Off Auto picture control OFF position. L1 Auto picture control LEVEL 1 position. L2 Auto picture control LEVEL 2 position. 36