Sanyo PLV Z2 Owners Manual

Sanyo PLV Z2 - LCD Projector - HD Manual

Get Sanyo PLV Z2 - LCD Projector - HD PDF manuals and user guides View all Sanyo PLV Z2 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLV Z2 manual content summary:

  • Sanyo PLV Z2 | Owners Manual - Page 1
    Multimedia Projector MODEL PLV-Z2 Owner's Manual
  • Sanyo PLV Z2 | Owners Manual - Page 2
    14 Cleaning the Projector Cabinet 44 15 Lamp Replacement 45 16 Lamp Replace Counter 46 16 17 17 Appendix 47 Troubleshooting 47 18 Indicators and Projector Condition 49 Menu Tree 50 18 Compatible Computer Specifications 52 18 Technical Specifications 53 19 Dimensions 54
  • Sanyo PLV Z2 | Owners Manual - Page 3
    operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC
  • Sanyo PLV Z2 | Owners Manual - Page 4
    for cleaning. Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line
  • Sanyo PLV Z2 | Owners Manual - Page 5
    CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR - Do not drop or bump a projector, otherwise damages or malfunctions may result. - When carrying a projector, use a suitable carrying case. - Do not transport a projector by using a courier or transport service in an unsuitable transport case. This
  • Sanyo PLV Z2 | Owners Manual - Page 6
    PLV-Z2 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector grounding-type AC line plug. This need to be replaced, an ASTA approved your User Instructions. If is coloured blue must
  • Sanyo PLV Z2 | Owners Manual - Page 7
    service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector cord does not match your AC outlet, contact your sales dealer. Projector side AC outlet side For the U.S.A. and Canada For Continental Europe Ground
  • Sanyo PLV Z2 | Owners Manual - Page 8
    lamp life. (See page 40.) N Aperture (Contrast) Adjustment Contrast can be adjusted not only through menu operation but also by the aperture lever. (See page 19.) N Compatibility The projector page 32.) N 16 : 9 Wide Screen The projector is equipped with LCD panels (1280 x 720 resolution) of 16 : 9
  • Sanyo PLV Z2 | Owners Manual - Page 9
    Ring (Up/Down) !1 Lens Shift Ring (Left/Right) q Power Cord Connector w Main On/Off Switch e Air Intake Vent r Terminals and Connectors Bottom q w er q Adjustable Feet w Lamp Cover e Air Intake Vent (back and bottom) r Air
  • Sanyo PLV Z2 | Owners Manual - Page 10
    Names and Functions Terminal q * w e r t q DVI-I RGB/COMPONENT Connect computer output (Digital/Analog DVI-I type), component video output, or RGB Scart 21-Pin video output to this terminal. (p16, 17) w SERVICE PORT This jack is used to service this projector. e VIDEO Connect the composite
  • Sanyo PLV Z2 | Owners Manual - Page 11
    detects abnormal condition. This also flashes red when the internal temperature of the projector exceeds the operating range. (p42) r LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p45) y POINT (Upe/Downd/Left7/Right8) button Selects an item or adjusts
  • Sanyo PLV Z2 | Owners Manual - Page 12
    , 39) !0 POWER ON-OFF button Turns the projector on or off. (p18) !1 SELECT button Executes the item selected, or to expand or compress image in the Digital zoom mode. (p38) !2 IMAGE ADJ. button Displays the On-Screen Menu of the Image Adjust Menu in a line and adjusts image level. You can directly
  • Sanyo PLV Z2 | Owners Manual - Page 13
    the remote control to moisture, or heat. G Do not drop the remote control. G If a battery has leaked on remote control, carefully wipe case clean and install new batteries. G Risk of explosion if battery is replaced by an incorrect type. G Dispose of used batteries according to the instructions. 13
  • Sanyo PLV Z2 | Owners Manual - Page 14
    undo the feet lock latches. Keystone distortion of the projected image can be adjusted by menu operation. (p20, 39) CAUTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be taken. See page 5. 14 Adjustable Feet Feet Lock Latches
  • Sanyo PLV Z2 | Owners Manual - Page 15
    Installation Moving the Lens The projection lens can be moved up, down, left, and right with the manual lens shift function. This function makes it easy to provide a projected image where you want. Turn the lens shift ring (left/right) left/right to
  • Sanyo PLV Z2 | Owners Manual - Page 16
    the Input Menu (p24). Connecting to Video Equipment (Component, DVI compatible with HDCP) Component, DVI compatible with HDCP Use a the projector and the external equipment should be disconnected from AC outlet. 16 DVI Cable Component Cable (RCA x 3) ComponentDVI-I RGB/COMPONENT DVI Cable
  • Sanyo PLV Z2 | Owners Manual - Page 17
    option) for analog. IBM-compatible or Macintosh computer Monitor Out DVI Cable DVI-I RGB/COMPONENT DVI-VGA Cable NOTE G See page 55 for ordering optional cables. NOTE When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet
  • Sanyo PLV Z2 | Owners Manual - Page 18
    is off. (See the Setting Menu on page 40.) 2 Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to flash switch off and disconnect the AC power cord. TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
  • Sanyo PLV Z2 | Owners Manual - Page 19
    Zoom Adjustment Move the Zoom Lever to zoom in and out. Basic Operation Focus Adjustment Rotate the Focus Ring to adjust the projected picture focus. Zoom Lever Aperture (Contrast) Adjustment Move the Aperture Lever to adjust contrast. Focus Ring Aperture Lever 19
  • Sanyo PLV Z2 | Owners Manual - Page 20
    distortion, correct the image with KEYSTONE adjustment. 1 Press the KEYSTONE L/M button on the remote control or select the Keystone in the Setting Menu (p39). The Keystone dialog box appears. 2 Correct keystone distortion by pressing the KEYSTONE L/M button or the Point Up/Down button. Press the
  • Sanyo PLV Z2 | Owners Manual - Page 21
    button POINT button Top Control LAMP REPLACE MENU SELECT INPUT POINT button SELECT button MENU button On-Screen Menu (Main Menu) Point Right button On-Screen Menu (Sub-Menu) Item NOTE G If you are selecting a sub-menu or an item displayed in a line, pressing the MENU button takes you back
  • Sanyo PLV Z2 | Owners Manual - Page 22
    or Natural wide. (p30) Setting Menu: changes various settings; Language, Keystone, Blue back, Display, Background color, Menu position, Logo, Capture, Ceiling, Rear, Power management, Power off confirmation, Lamp mode, Remote control, Lamp counter reset, and Factory default. (p39-41) COMPUTER MENUS
  • Sanyo PLV Z2 | Owners Manual - Page 23
    selected through the INPUT 1 buttons on the remote control or through menu operation as described on the next page. INPUT button Input 1 input. It is convenient for you to select the AUTO as the projector automatically detects incoming video signal, and adjust itself to optimize its performance
  • Sanyo PLV Z2 | Owners Manual - Page 24
    and then press the Point Right button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SELECT button. Auto When selecting the AUTO button, the projector automatically detects incoming video signal, and adjusts itself to optimize
  • Sanyo PLV Z2 | Owners Manual - Page 25
    and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. G Component-DVI Cable and Scart-DVI Cable are options. See page 55 for order. Source Selection Menu pointer Closes the source selection
  • Sanyo PLV Z2 | Owners Manual - Page 26
    . Component Video Signal Format If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV System Menu (Component) NOTE G The AV System Menu cannot be selected when selecting RGB
  • Sanyo PLV Z2 | Owners Manual - Page 27
    and then press the Point Right button to enter the sub-menu. Image Select Menu 2 Choose the level that you want to select with the Point Up/Down button and then press the SELECT button. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine
  • Sanyo PLV Z2 | Owners Manual - Page 28
    the Point Right button to deepen blue tone. (From -31 to +31) This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item. Press the SELECT button to adjust the next item. Press the MENU button to return to the
  • Sanyo PLV Z2 | Owners Manual - Page 29
    previous item. Press the Point Right button at this icon to store the value. The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down button and press the SELECT remote control. (p12) G Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. 29
  • Sanyo PLV Z2 | Owners Manual - Page 30
    projector has a useful function to resize a projected screen. 1 Select the Screen Menu with the Point Up/Down button, and then press the Point Right button to enter the sub-menu. Screen Menu G Screen Menu cannot be selected when "720p", "1035i", or "1080i" is selected in the AV System Menu (p26).
  • Sanyo PLV Z2 | Owners Manual - Page 31
    then press the Point Right button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SELECT button. RGB (Analog) When the input source is analog coming from a computer through the DVI terminal, select RGB (Analog). RGB (PC Digital) When
  • Sanyo PLV Z2 | Owners Manual - Page 32
    . When the image is not provided properly, manual adjustment is required. (p34, 35) PC System Menu - - - - There is no signal input from the connected computer. Check the connection of the computer and see if the projector is set correctly. (See "Troubleshooting" on page 47.) Mode 1 User preset
  • Sanyo PLV Z2 | Owners Manual - Page 33
    Vertical for the input signal from your computer. To store adjustment data Adjustment parameters from Auto PC Adjustment can be memorized in this projector with HDCP. G The Auto PC Adjust cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu. This
  • Sanyo PLV Z2 | Owners Manual - Page 34
    projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. 1 Select the PC Adjust Menu button to adjust the position. Vertical Adjusts vertical picture position. Press the Point Left
  • Sanyo PLV Z2 | Owners Manual - Page 35
    press the SELECT button. Display area V Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrease/increase being stored. Vacant Mode shows values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." NOTE G Auto PC Adjust
  • Sanyo PLV Z2 | Owners Manual - Page 36
    press the Point Right button to enter the sub-menu. Image Select Menu 2 Choose the level that you want to select with the Point Up/Down button and then press the SELECT button. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE
  • Sanyo PLV Z2 | Owners Manual - Page 37
    -31 to +31) White balance (Blue) Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From -31 to +31) adjustment data, select Store and press the Point Right button. The Image Level Menu will appear. Choose one of 4 image levels with the Point Up/Down
  • Sanyo PLV Z2 | Owners Manual - Page 38
    p12) G This Screen Menu cannot be operated when "720p (HDTV)", "1035i (HDTV)", or "1080i (HDTV)" is selected in the PC System Menu (p32). G The True and Digital zoom cannot be selected when "480i", "575i", "480p", or "575p" is selected in the PC System Menu (p32). G This projector cannot display any
  • Sanyo PLV Z2 | Owners Manual - Page 39
    is distorted vertically, select the Keystone. The OnScreen Menu disappears and the Keystone dialog box is displayed. Correct keystone distortion by pressing the Point Up/Down button. Refer to Keystone Adjustment on page 20. Blue back When this function is "On," the projector produces a blue image
  • Sanyo PLV Z2 | Owners Manual - Page 40
    the image from a ceiling mounting the projector. Rear When this function is "On," the picture is left/right reversed. This function is used to project the image to a rear projection screen. Power management For reducing power consumption as well as maintaining the lamp life, the Power management
  • Sanyo PLV Z2 | Owners Manual - Page 41
    MENU and the IMAGE button on the remote control together for over 10 seconds. After changing the code, make sure the remote control operates properly. To return to the initial code (Code 1), repeat the steps above. Factory default Lamp counter reset This function is used to reset the lamp replace
  • Sanyo PLV Z2 | Owners Manual - Page 42
    away from the ventilation duct of air-conditioning equipment.  Is the air filter clean? Clean the air filter or replace it with a new one. The projector is shut down and the WARNING indicator lights red When the projector detects an abnormal condition, it is automatically shut down to protect the
  • Sanyo PLV Z2 | Owners Manual - Page 43
    accumulate on a lens, LCD panels, or optical elements inside the projector. This condition may degrade the quality of a projected image. When the above symptoms are noticed, contact your authorized dealer or service station for proper cleaning. Latch Replacing the Air Filter When there is much
  • Sanyo PLV Z2 | Owners Manual - Page 44
    scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily
  • Sanyo PLV Z2 | Owners Manual - Page 45
    . Screw Lamp Cover Screw Lamp Handle Screw ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLV-Z2 POA-LMP69 (Service Parts
  • Sanyo PLV Z2 | Owners Manual - Page 46
    and Cleaning Lamp Replace Counter Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. 1 Turn the projector on, press the MENU button, and the OnScreen Menu will appear. Select the Setting Menu with
  • Sanyo PLV Z2 | Owners Manual - Page 47
    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to Video Equipment" and "Connecting to a Computer" on page16 and 17. -
  • Sanyo PLV Z2 | Owners Manual - Page 48
    (See page 41) WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain about the
  • Sanyo PLV Z2 | Owners Manual - Page 49
    • • flashes red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp. See page 45 and 46. 49
  • Sanyo PLV Z2 | Owners Manual - Page 50
    Select Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N Auto 1080i 1035i 720p 575p 480p 575i 480i Standard Cinema Game Image 1 Image 2 Image 3 Image 4 Auto Video S-Video Y, Pb/Pc, Pr/Cr RGB( Analog ) RGB( PC Digital ) RGB( AV HDCP ) Component RGB( Scart ) Go to System (1) or (2) Go to System (1) Go to
  • Sanyo PLV Z2 | Owners Manual - Page 51
    Image 1 Image 2 Image 3 Image 4 Quit Normal Full True Digital zoom Language Keystone Blue back Display Background color Menu Position Logo Capture Ceiling Rear Power management Power off confirmation Lamp mode English German French Italian Spanish Portuguese Dutch Swedish Russian Chinese Korean
  • Sanyo PLV Z2 | Owners Manual - Page 52
    Specifications Basically this projector 1152 x 900 SXGA 18 1280 x 1024 480p -------- 575p -------- 720p -------- 1035i -------- 1080i -------- 1080i -------- H-Freq. (kHz) 56 00 (Interlace) When an input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY
  • Sanyo PLV Z2 | Owners Manual - Page 53
    Appendix Technical Specifications Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Projection Lens Throw Distance Projection Lamp Video Input Jacks Computer
  • Sanyo PLV Z2 | Owners Manual - Page 54
    Appendix Dimensions Unit : inch (mm) 11.8˚ (Max.) 14.13 (359) 4.52 (114.7) ON-OFF POWER WARNING LAMP REPLACE MENU SELECT INPUT 10.79 (274) 3.82 (97) 54
  • Sanyo PLV Z2 | Owners Manual - Page 55
    DVI-I Appendix Pin Configuration C1 C2 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 C3 C4 C5 C1 Analog Red Input C2 Analog Green Input C3 Analog Blue and Type No. to the sales dealer. G Wall Anchor Kit Type No. : POA-CH-EX01 G DVI Cable Type No. : KA-DV20 G DVI-VGA Cable Type No.
  • Sanyo PLV Z2 | Owners Manual - Page 56
    Printed in Japan Part No. 610 309 7923 (1AA6P1P4276-- M4KA) SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Multimedia Projector
MODEL
PLV-Z2
Owner’s Manual