Sanyo PLV Z2 Owners Manual - Page 28

Video Input Image Level Adjustment 1 Select the Image Adjust Menu with the Point Up/Down button, Image Adjust Menu and then press the Point Right button to enter the sub-menu. 2 Select an item with the Point Up/Down button and press the Point Left/Right button to adjust the item. Contrast Press the Point Left button to decrease contrast and the Point Right button to increase contrast. (From -31 to +31) Brightness Press the Point Left button to adjust image darker and the Point Right button to adjust image brighter. (From -31 to +31) The level being selected Color Press the Point Left button to lighten color and the Point Right button to deepen color. (From -31 to +31) Tint Press the Point Left/Right button to obtain proper color. (From -31 to +31) Color temp. Press the Point Left/Right button for Color temperature level that you want to select. (High, Mid, Low1, Low2, Low3) White balance (Red) Press the Point Left button to lighten red tone and the Point Right button to deepen red tone. (From -31 to +31) White balance (Green) Press the Point Left button to lighten green tone and the Point Right button to deepen green tone. (From -31 to +31) White balance (Blue) Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From -31 to +31) This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item. Press the SELECT button to adjust the next item. Press the MENU button to return to the previous OnScreen Menu and store the adjusted value. Go on to the next page... NOTE G You can also adjust items with the IMAGE ADJ. (IMAGE) button on the remote control. (p12) G Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N except for 575i. 28