Sanyo PLV Z2 Owners Manual - Page 23

Video Input Input Source Selection (INPUT 1 Terminal/Video, S-Video, Component) Direct Operation INPUT button Choose Input 1 by pressing the INPUT button on the top control or on the remote control. Before using these buttons, correct input source should be selected through the INPUT 1 buttons on the remote control or through menu operation as described on the next page. INPUT button Input 1 Input 2 Top Control Remote Control SELECT INPUT INPUT button INPUT 1 buttons Press the AUTO, VIDEO, S-VIDEO, or COMPO button on the remote control according to video input. It is convenient for you to select the AUTO as the projector automatically detects incoming video signal, and adjust itself to optimize its performance. Remote Control AUTO When selecting the AUTO button, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. However, the projector selects connection in the following order under the condition of connecting more than one input source: 1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO 3rd VIDEO Y-Pb/Cb-Pr/Cr has priority over S-VIDEO. S-VIDEO has priority over VIDEO. VIDEO When video input signal is connected to the VIDEO jack, select Video. S-VIDEO When video input signal is connected to the S-VIDEO jack, select S-Video. COMPO When video input signal is connected to the Y-Pb/CbPr/Cr jacks, select COMPO. INPUT 1 buttons: AUTO / VIDEO / S-VIDEO / COMPO 23