Sanyo SCP-8500KDLXPI User Guide - Page 59

Phone Basics To place a call using Contacts Match Abbreviated Dialing: 1. Enter the last three to six digits of a Contacts entry's phone number. 2. Press . If there is more than one matched number in your Contacts, the Abbrev. Dial list is displayed. 3. Select the name you want to call from the list, and then press to place a call. Note: WhenContactsMatchisset toOnandanumberissavedinyour Contacts(regardlessofwhetherPrependisset toOnorOff),you candisplaythenumberbyenteringitslast threetosixdigits. To place a call using Prepend Abbreviated Dialing: 1. Enter the last four or five digits of the number. 2. Press . Note: WhenPrependisset toOnandContactsMatchisset toOff,youcan displaythe10-digit number(includingthepredefinedprepend number)byenteringthelast fourorfivedigitsofthenumber. Note: The Prepend feature is available when all of following conditions are met: • Prepend is set to On. • A prepend number has been predefined. •The combined total (prepend number plus the digits you enter) is 10 digits. When both Contacts Match and Prepend are set to On and a number is not saved in your Contacts, you can display the 10digit number (including the five- or six-digit prepend number) by entering the last four or five digits of the number. Tip: You can also place a call by selecting Options (right softkey) > Abbrev.Dial after step 1 above for either Contacts Match Abbreviated Dialing or Prepend Abbreviated Dialing. Section 2A: Phone Basics 41