Sanyo VCC-HD4600 VCC-HD4600 Summary Manual
Sanyo VCC-HD4600 - Full HD 1080p Day/Night Network Camera Manual
The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.
Sanyo VCC-HD4600 manual table of contents:
SUMMARY MANUAL VCC-HD4600 VCC-HD4600P Megapixel Camera THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO... carefully the electronic manual (INSTRUCTION MANUAL) contained in the supplied CD-ROM to ensure correct operation of the camera. Deutsch ...
... Ver. 7.0 ■ You can automatically set up the IP address of the camera. This software application is useful when two or more cameras are connected to the network. Download "Auto IP Setup" software application from the supplied CD-ROM. 1
...in a dedicated hard disk case (VA-HDC4000), sold separately) and then connect the case to the camera. For details, refer to "Installing and formatting recording media" section on the electronic manual. Audio Output Jack (AUDIO OUT, 3.5-mm mini...
... media" section on the electronic manual. LAN Connector (RJ-45) Use this socket to connect the camera to your PC to enable network operation.... a connection has been established between the camera and the network. After that, it will blink when data are being transmitted via the...
... Face Operation Buttons When using operation buttons on the camera, slide and open the side cover ... SET button. Miscellaneous operations (ex. restarting the camera) Never press the RESET button while ...video may not be recorded properly. • Restarting camera: Press the RESET button. OPTION SETTINGS ...
... and then stay lit after the camera recognizes the recording medium and is ready ... (for default users only): Press the and buttons simultaneously. Not supported via network ... be attached to either the top or bottom face of the camera depending on the installation environment. For bracket installation,...
... 12 VDC power supply: Note the polarity (+/-) of the power terminals when connecting the camera to a 12 VDC power supply. Incorrect polarity may cause damage...the 24 VAC/12 VDC terminal is within the operating range of the camera. When the camera is powered on, the POWER indicator lights up and the ...
... output terminal (MONITOR OUT). Network Connection This camera is designed so that you can ... or higher, or Internet Explorer Ver.7.0. • Configure the network information using the camera's menu item ..., or other device to these terminals enables the camera to detect alarm conditions such as the entry...
Basic Connections • Day/Night switching Normally, switching the camera between the color and black-and-white video modes is... as the Day/Night switching terminal, however, enables the camera to be switched between the color and black-andwhite video modes when an external control signal is received....
... Check your operating environment. ( Page 1) Connect the camera to the network to which your PC is also ...user (administrator). In the address bar, type the IP address of the camera and press [Enter] key.... in the network. If so, change the IP address of the existing device before accessing the camera....
Network Settings Type your user name and password and click [OK]. ... screen appears. If this is the first access to the camera, log in as an admin user (administrator) using the following ... selection screen. If this is the first access to the camera, configure the system clock on the CLOCK SETTINGS ...
... Spanish, Japanese For further details on the specifications of the camera, refer to the electronic manual. ■ I/O Video output HD ...-T/100BASE-TX (RJ-45 connector) For connecting SANYO-specified external hard disk case (... recommended SD memory cards, visit our website. http://www.sanyo-cctv.net/ 11
Specifications ■ Network Image/video compression Video size (H.264) Video size (JPEG) H.264... FINE BITRATE mode: User-specified bit rate 10BASE-T/100BASE-TX TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP...) 20 BASIC authentication (ID/password), SSL, IP filtering Picture quality Interface Protocol Audio ...
Copyright Notice The instruction manual and the software are copyrighted by SANYO Electric Co., Ltd. No materials contained in the manual and the software may, wholly or partially, be copied, .... • The medium has reached the end of its service life. ■ License for Software Contained in CD-ROM ...
1AC6P1P4038-L5DH2/XE, US, JP (1009KR) SANYO Electric Co., Ltd.