Schwinn 420 Elliptical 2012 model Assembly and Owner's Manual - Page 5
Before Assembly
View all Schwinn 420 Elliptical 2012 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SPECIFICATIONS determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C onsult the dealer or an experienced radio/TV technician for help. Maximum User Weight: 300 lbs. (136 kg) Power Requirements: Operational Voltage: Operational Voltage 9VDC Operating Current: 1500 mA Regulatory Approvals: AC Power Adapter: UL listed, CSA certified (or equivalent), Rated 120V 60Hz Input, 9VDC, 1500mA Output. Class 2 or LPS. 71" (180.3 cm) 62" (157.5 cm) 26" (66 cm) Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 74" x 130" (1.9 m x 3.3m). Basic Assembly Tips Follow these basic points when you assemble your machine: 1. Read and understand the "Important Safety Instructions" before assembly. 2. Collect all the pieces necessary for each assembly step. 3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise. 4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. 5. The assembly requires 2 people. Note: Some axles contain oil. Use caution to avoid staining clothes or carpet. 5