Seagate 15K.3 ST373453FC Model Product Manual PDF

Seagate 15K.3 - Cheetah - Hard Drive Manual

Get Seagate 15K.3 - Cheetah - Hard Drive PDF manuals and user guides
UPC - 000004165019
View all Seagate 15K.3 manuals
Add to My Manuals
Save this manual to your list of manuals

Seagate 15K.3 manual content summary:

  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 1
    Cheetah 15K.3 FC Disc Drive ST373453FC ST336753FC ST318453FC Product Manual, Volume 1
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 2
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 3
    Cheetah 15K.3 FC Disc Drive ST373453FC ST336753FC ST318453FC Product Manual, Volume 1
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 4
    © 2002, 2003 Seagate Technology LLC. All rights reserved. Printed in the USA. March 2003 Publication number: 100148129, Rev. D Seagate, Seagate Technology, and the Seagate logo are registered trademarks or trademarks of Seagate Technology LLC. Cheetah, SeaFAX, SeaFONE, SeaBOARD, and SeaTDD are
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 5
    Revision Rev. A Rev. B Rev. C Rev. D Revision status summary sheet Date 05/03/2002 07/08/2002 11/26/2002 03/03/2003 Writer/Engineer K. Schweiss/B. Hohn K. Schweiss/B. Hohn K. Schweiss/B. Hohn K. Schweiss/B. Hohn Sheets Affected 1/1, v-vii, and 1-74. 1/1, v-vii, and 1-74. Front and back covers,
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 6
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 7
    Cheetah 15K.3 FC Product Manual, Rev. D v Contents 1.0 Scope 1 2.0 Applicable standards and reference documentation 3 2.1 Standards Service life 14 5.2.4 Service philosophy 14 5.2.5 Service tools 14 5.2.6 Hot plugging the drive 14 5.2.7 S.M.A.R.T 15 5.2.8 Thermal monitor 16 5.2.9 Drive
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 8
    Cheetah 15K.3 FC Product Manual, Rev. D 6.4.1 Drive internal defects/errors 33 7.2 Drive error recovery procedures 33 7.3 FC-AL system errors 34 8.0 Installation 35 8.1 Drive driver signals 62 Differential PECL output 63 Differential PECL input 63 10.0 Seagate Technology support services
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 9
    Cheetah 15K.3 FC Product Manual, Rev. D ix Figure 1. Figure 2. drive 1 Typical ST373453FC drive +12V current profile 22 Typical ST373453FC drive +5V current profile 23 Typical ST336753FC drive +12V current profile 23 Typical ST336753FC drive +5V current profile 24 Typical ST318453FC drive
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 10
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 11
    LLC, Cheetah® 15K.3 FC (Fibre Channel) disc drives. Cheetah 15K.3 FC drives support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifications to the extent described in this manual. The Fibre Channel Interface Manual (part number 77767496) describes the general Fibre Channel
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 12
    2 Cheetah 15K.3 FC Product Manual, Rev. D
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 13
    the appropriate sections of this manual and the Seagate Fibre Channel Interface Manual, part number 77767496. The Cheetah 15K.3 FC disc drive is a UL recognized component does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with the
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 14
    documents Cheetah 15K.3 FC Installation Guide Seagate part number: 100148127 Fibre Channel Interface Manual Seagate part number: 77767496 ANSI 8067 Specification for 40-pin SCA-2 Connector with Bidirectional Enclosure Services Interface ANSI Small Computer System Interface (SCSI) Documents X3
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 15
    to support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual (part number 77767496) which describes the general interface characteristics of this drive. Cheetah 15K.3 FC drives are
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 16
    public attachment • Differential copper FC drivers and receivers • Downloadable firmware using the FC-AL interface • Supports SCSI enclosure services via interface connector • 128-deep task set (queue) • Supports up to 32 initiators • Drive selection ID and configuration options are set on the FC-AL
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 17
    table shows the standard OEM model capacity: ST373453FC ST336753FC ST318453FC Formatted 088BB998h (73.4 Gbytes) Manual, part number 7767496. A value of zero in the Number of Blocks field indicates that the drive will standard drives are shipped with the Cheetah 15K.3 FC Installation Guide (part
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 18
    8 Cheetah 15K.3 FC Product Manual, Rev. D
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 19
    drives. 4.1 Internal drive characteristics Drive capacity Read/write data heads Bytes per track Bytes per surface Tracks per surface (total) Tracks per inch Peak bits per inch Internal data rate Disc rotation speed Avg rotational latency ST373453FC Fibre Channel Interface Manual (part number
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 20
    Cheetah 15K.3 FC Product Manual, Rev. D Minimum sector interleave 1 to 1 Data buffer to/from disc media (one 512-byte logical block)* Fibre Channel Interface Manual less than 3 seconds after DC power has been applied. After the Motor Start command has been received, the drive becomes ready
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 21
    control) in the Fibre Channel Interface Manual. The following is a simplified description range of user-selectable configurations. The drive supports operation of any integer number of segments set up a new segment size. If the STRICT bit in Mode page 00h (byte 2, bit 1) is set to one, the drive
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 22
    Manual, Rev. D was written there at the beginning of the operation; however, the drive does not overwrite data that has not yet been written to the medium. If write caching is enabled (WCE=1), then the drive Table 16 shows the mode default settings for the drive. 4.5.2 Prefetch operation If the
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 23
    flaws reallocated. 5.1 Error rates The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC power requirements." • The drive has been formatted with the FC-AL Format command. • Errors caused
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 24
    of major parts is permitted during the service lifetime. 5.2.4 Service philosophy Special equipment is required to repair the drive HDA. Repairs must be performed only at a properly equipped and staffed Seagate service and repair facility. Troubleshooting and repair of PCBs in the field
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 25
    line to an optional port bypass circuit (external to the drive), defaults to the Enable Bypass state. If drive's firmware monitors specific attributes for degradation over time but can't predict instantaneous drive failures. Each monitored attribute has been selected to monitor a specific set
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 26
    .3 FC Product Manual, Rev. D . The algorithm that S.M.A.R.T. uses to record rates of error is to set thresholds for the number of errors and their interval. If the number signals predictive failures when the drive is performing unacceptably for a period of time. The firmware keeps a running count of
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 27
    Cheetah 15K.3 FC Product Manual, Rev. D 17 the Log Select command. The reference temperature parameter in the temperature log page (see Table 1) can be used to set this trip point. The default value for this drive is 65°C, however, you can set it to any value in the range of 0 to 65°C. If you
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 28
    18 Cheetah 15K.3 FC Product Manual, Rev. D In these conditions, the drive responds to a Test Unit Ready command with an : 1. The Function Code field is set to the same value as sent in the DST command 2. The Self-Test Results Value field is set to Fh 3. The drive will store the log page to non
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 29
    Cheetah 15K.3 FC Product Manual, Rev. D 19 5.2.10 Product warranty Beginning on the date of products on your purchase documentation. The remaining warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472. You can also determine remaining warranty
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 30
    20 Cheetah 15K.3 FC Product Manual, Rev. D
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 31
    6.2 DC power requirements The voltage and current requirements for a single drive are shown below. Values indicated apply at the drive connector. Table 2: DC power requirements for operation at 1Gb mode ST373453FC ST336753FC ST336753FC Notes (Amps) (Amps) (Amps) (Amps) (Amps) (Amps) Voltage
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 32
    -up and down. 6.2.3 Current profiles The +12V and +5V current profiles for the ST373453FC, ST336753FC, and ST318453FC models are shown below in the following figures. T0 Power is applied to the drive. T1 Controller self-tests are performed. T2 Spindle begins to accelerate under current limiting
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 33
    Cheetah 15K.3 FC Product Manual, Rev. D 23 Figure 3. Typical ST373453FC drive +5V current profile Figure 4. Typical ST336753FC drive +12V current profile
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 34
    24 Cheetah 15K.3 FC Product Manual, Rev. D Figure 5. Typical ST336753FC drive +5V current profile Figure 6. Typical ST318453FC drive +12V current profile
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 35
    Cheetah 15K.3 FC Product Manual, Rev. D 25 Figure 7. Typical ST318453FC drive +5V current profile
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 36
    .3 FC Product Manual, Rev. D 6.3 Power dissipation ST373453FC Typical power dissipation drive in your system on the horizontal axis and read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. ST373453FC
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 37
    Product Manual, Rev. D 27 ST318453FC Typical power dissipation under idle conditions in 2Gb operation is 9.6 watts (32.8 BTUs per hour). To obtain operating power for typical random read operations, refer to the following I/O rate curve (see Figure 8). Locate the typical I/O rate for a drive in
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 38
    28 Cheetah 15K.3 FC Product Manual, Rev. D b. Non-operating -40° to 158°F (-40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 39
    Cheetah 15K.3 FC Product Manual, Rev. D 29 fied operational performance will continue when normal operating shock height 60 in (1524 mm) 48 in (1219 mm) 42 in (1067 mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 40
    30 Cheetah 15K.3 FC Product Manual, Rev. D Z Y X X Z Y Figure 12. Recommended mounting
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 41
    Cheetah 15K.3 FC Product Manual, Rev. D 31 6.4.4.2 Vibration a. Operating-normal The drive as installed for normal operation, shall any discrete tones more than 10 dB above the masking noise on typical drives when measured according to Seagate specification 30553-001. There will not be any tones
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 42
    Product Manual, Rev. D 6.5 Mechanical specifications The following nominal dimensions are exclusive of the decorative front panel accessory. However, dimensions of the front panel are shown in figure below. Refer to Figure 13 for detailed mounting configuration dimensions. See Section 8.5, "Drive
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 43
    Manual. The drive implements selectable error recovery time limits required in video applications. The error recovery scheme supported by the drive the Error Recovery mode page. The drive firmware error recovery algorithms consists of 11 or AWRE bit (for writes) is one, the RC bit is zero, and the
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 44
    15K.3 FC Product Manual, Rev. D When the RC bit is one, reallocations are disabled even if the ARRE or AWRE bits are one. The drive will still perform recovery page has the RC bit = 0, the read retry count set to 4, and the recovery time limit set to 450. A 4-block read command can take up to 244
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 45
    Cheetah 15K.3 FC Product Manual, Rev. D 35 8.0 Installation Cheetah 15K.3 FC disc drive installation is a plug-and-play process. There are no jumpers, switches, or terminators on the drive. Simply plug the drive into the host's 40-pin Fibre Channel backpanel connector (FC- SCA)-no cables are
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 46
    FC Product Manual, Rev. D Drive Front Pin 1 J6 Reserved Port A Bypass LED [1] Port B Bypass LED [1] Fault LED [1] Reserved Active LED [2] Reserved +5V Active LED [1] Ground [3] [1] The drive has a 2.2K ohm resistor in series with this LED driver. Tie the minus side of an external high-efficiency
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 47
    that it can meet the shock and vibration specifications listed in this manual. 8.6 Grounding Signal ground (PCBA) and HDA ground are connected together in the drive and cannot be separated by the user. The equipment in which the drive is mounted is connected directly to the HDA and PCBA with no
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 48
    38 Cheetah 15K.3 FC Product Manual, Rev. D ground, the systems integrator or user must provide a nonconductive (electrically isolating) method of mounting the drive in the host equipment. Increased radiated emissions may result if you do not provide the maximum surface area ground connection
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 49
    Manual (part number 77767496). 9.1 FC-AL features This section lists the Fibre Channel-specific features supported by Cheetah 15K.3 FC drives. 9.1.1 Fibre Channel link service frames Table 4 lists the link services supported by Cheetah 15K.3 FC drives. Table 4: Link services supported
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 50
    Cheetah 15K.3 FC Product Manual, Rev. D 9.1.4 Fibre Not checked. Port Login Accept will return a 0-not supported. Valid version level x N_Port/F_Port Must = 0, N_Port name. The node name is not checked or saved by the drive. SO Service options Class 3 only. MSB Class valid Must = 1
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 51
    Cheetah 15K.3 FC Product Manual, Rev. D 41 9.1.5 Fibre Channel port login accept Table 8 identifies and 24) and (31 and 32) are currently factory set to 04 CF respectively (subject to change). FS Receive buffer field size. The drive returns and uses the receive buffer size from the N_Port Login
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 52
    15K.3 FC Product Manual, Rev. D 9.1.8 Fibre Channel fabric login Table 11 lists the fabric login payload from the drive. Table 11: 32) are currently factory set to 04 CF respectively (subject to change). UI Unique identifier. This 24-bit field is uniquely assigned to the drive. This same UI
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 53
    Cheetah 15K.3 FC Product Manual, Rev. D 43 9.1.9 Fibre Channel fabric accept login Table 11 occurs and a LS_RJT is returned to the fabric. NN Node Name. The drive does not check or save the node name. SO Service Options-Class 3 only. MSB Class valid Must = 1 Intermix x Stacked connection
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 54
    ) the connection of Port A and B for these products must follow the requirements in their product manuals. Subject to buffer availability, the Cheetah 15K.3 FC drives support: • Concurrent port transfers-The drive supports receiving transfers on both ports at the same time when the ports are on
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 55
    (00h) Y Unit serial number page (80h) Y Implemented operating def. page (81h) Y Device Identification page (83h) Y Firmware numbers page (C0h) Y Date code page (C1h) Y Jumper settings page (C2h) Y Device Behavior page (C3h) Y Mode select (same pages as Mode Sense command shown below
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 56
    Manual, Rev. D Table 14: Supported commands (continued) Command code 1Dh 25h 28h 2Ah 2Bh 2Eh 2Fh 30h 31h 32h 33h 34h 35h 36h 37h 39h 3Ah 3Bh 3Ch Supported [4] Command name Y Translate page Y Enclosure services page Y Send diagnostics page Y Supported low N Set limits Firmware download
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 57
    Manual, Rev. D 47 Table 14: Supported commands (continued) Command code 3Eh 3Fh 40h 41h 42-4Bh 4Ch 4Dh 4E-4Fh 50h 51h 52h 53-54h 55h 56h 57h 58-59h 5Ah 5B-5Dh 5E 5F 60-7Fh 80h 81h 82h 83-8Fh C0-DFh EO-FFh Supported used Y Log Select Y Log Sense Y Support Log page (00h) Y Write Error
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 58
    Warning. Power loss during flash programming can result in firmware corruption. This usually makes the drive inoperable. [3] Reference Mode Sense command 1Ah for mode pages supported. [4] Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request.
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 59
    report its operating parameters to the initiator. The drive maintains four sets of mode parameters: 1. Default values Default values are hard-coded in the drive firmware stored in flash E-PROM (nonvolatile memory) on the drive's PCB. These default values can be changed only by downloading a complete
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 60
    bits in byte 02 are ones, all of these bits are changeable. The changeable values list can only be changed by downloading new firmware into the flash E-PROM. Note. Because there are often several different versions of drive control firmware in the total population of drives in the field, the Mode
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 61
    Cheetah 15K.3 FC Product Manual, Rev. D 51 Table 16: Mode Sense data default and changeable values for ST373453FC drives ST373453FC Bytes 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 62
    52 Cheetah 15K.3 FC Product Manual, Rev. D Table 17: Mode Sense data default and changeable values for ST336753FC drives ST336753FC Bytes 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 63
    Cheetah 15K.3 FC Product Manual, Rev. D 53 Table 18: Mode Sense data default and changeable values for ST318453FC drives ST318453FC Bytes 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 64
    Manual, Rev. D 9.4 Miscellaneous operating features and conditions Table 19 lists various features and conditions. A "Y" in the support column indicates the feature or condition is supported. An "N" in the support tags supported) bytes Table 20: Miscellaneous status Supported Y Y Y Y Y Y
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 65
    drives are provided in the Fibre Channel Interface Manual drives may be connected in a loop together or with other compatible FC-AL devices. A maximum of 127 devices may have addresses; however, one after a brief interruption. These PBCs are located external to the FC-AL device. Figure 18 shows
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 66
    56 Cheetah 15K.3 FC Product Manual, Rev. D 9.5.2 Connector requirements Recommended mating SCA part number: Part description Positions Part number Features AMP Vertical (SCA sequence) 40 Berg 40 Methode 40 Molex 40
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 67
    Manual, Rev. D 57 9.5.3 Electrical description Fibre Channel drives use the FC-SCA connector for: • DC power • FC-AL interface • Drive select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 68
    15K.3 FC Product Manual, Rev. D supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length. Four resistor are external to the drive. 9.5.8 Active LED Out The Active LED Out signal is driven by the drive as indicated in
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 69
    determine drive address, and, optionally, for an Enclosure Services Interface. supported. There are two modes of ESI, seven bits of enclosure status and a bidirectional mode. ESI support and the mode are determined by the drive using a discovery process. Refer to the Fibre Channel Interface Manual
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 70
    lines. A low level indicates the drive is attempting an ESI transfer. The enclosure may not support ESI on any or all drive locations. It may only support the address function. Support of ESI is discovered by the drive. Refer to the Fibre Channel Interface Manual for a description of ESI operations
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 71
    Cheetah 15K.3 FC Product Manual, Rev. D Table 24: Arbitrated loop physical address (AL_PA) values AL_PA (hex) EF E8 E4 E2 E1 E0 DC DA D9 D6 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D Setting (dec) 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 72
    to these lines, the drive has 10K ohm pull up resistors that default the device control code to 7 (1.0625 GHz). Table lists the supported codes. Table 25: Device 4mA IOH < -1.6mA IOH < -500µA IOL < 1.6mA 9.6.2 LED driver signals Fault and Active LED signals are located in the FC-SCA connector (
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 73
    Cheetah 15K.3 FC Product Manual, Rev. D 63 9.6.3 Differential PECL output The serial PECL output signal voltage characteristics are at the specified interface error rate. The inputs are AC coupled on the drive. 941 ps Vin (mv) Figure 23. Receive eye diagram 659 ps 376 ps Typical Minimum
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 74
    64 Cheetah 15K.3 FC Product Manual, Rev. D
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 75
    key distributors for a one-stop shopping experience. For support, questions and comments: Internet support services. Using a touch-tone phone, you can find service and support phone numbers, answers to commonly asked questions, troubleshooting tips and specifications for disc drives and tape drives
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 76
    for assistance specific to your system. Seagate technical support is also available to assist you online at support.seagate.com or through one of our technical support service centers. Have your system configuration information and your drive's "ST" model number available. SeaTDD™ (+1-405-936-1687
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 77
    15K.3 FC Product Manual, Rev. D 67 European Support Services For European presales, technical support, and warranty service, dial the toll- Friday. If your country is not listed here, direct dial one of our technical support locations. Call Center Australia China Hong Kong India* Indonesia Japan
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 78
    68 Cheetah 15K.3 FC Product Manual, Rev. D
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 79
    Manual, Rev. D Index Numerics 12 volt pins 58 3rd party reserve command 47 5 volt pins 58 A Abort Sequence (ABTS) 39 abort task set backpanel 57 backplane 59 basic link service frames 39 Basic_Accept (BA_ACC) 39 ACA function 39 clear task set function 39 commands supported 45 Common features 40, 43
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 80
    mode (6) 46 drive 31 drive active LED connection 35 drive characteristics 9 drive fault LED connection 35 drive ID 35 drive ID/option select headers 35 drive mounting 32, 37 drive orientation 36 drive select 57 driver signals 62 drivers and receivers 6 dual port support 44 E electrical description
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 81
    9 internal defects/errors 33 internal drive characteristics 9 J J1 connector 35 J6 connector 35, 36 Jumper settings page command 45 jumpers 35 L latency average rotational 9, 10 LBdata 47 LED driver signals 62 Link Service Reject (LS_RJT) 39 link services supported 39 Lock-unlock-cache command 46
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 82
    Intermediate/condition met/good 54 Intermediate/good 54 Reservation conflict 54 Task set full 54 miscorrected media data 13 Mode select (10) command 47 option configurations 35 option selection 57 options 7, 44 Cheetah 15K.3 FC Product Manual, Rev. D orientation 28 OS 40 out-of-plane distortion 37 P
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 83
    life 14 philosophy 14 tools 14 Service Options 43 Service options 40 Set limits command 46 shielding 3 shipping 19 shipping container 28 shock 28, 29 and vibration 28 shock mount 37 signal characteristics 62 LED driver 62 single-unit shipping pack kit 7 SMART 7, 15 SMP = 1 in Mode Select command
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 84
    not supported 05 39 Function reject 04 39 task set full status 54 technical support services 65 transmit eye diagram 63 transmitters 58 transporting the drive 19 TTL input characteristics 62 U UI 41 page (07h) command 45 Cheetah 15K.3 FC Product Manual, Rev. D vibration 28, 31 Vital product data
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 85
  • Seagate 15K.3 | ST373453FC Model Product Manual PDF - Page 86
    Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100148129, Rev. D, Printed in USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cheetah 15K.3 FC Disc Drive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST373453FC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST336753FC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ST318453FC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Manual, Volume 1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .