Seagate ST33221A Product Manual - Page 19
Installation using Disk Manager - jumper
View all Seagate ST33221A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Medalist 8641, 6531, 4321 and 3221, Rev. B 15 Installation using Disk Manager 1. Boot your computer from your DiscWizard diskette. Booting from a diskette ensures that the Disk Manager installation does not conflict with other software. The Disk Manager software is stored on this diskette and automatically starts. Or at the A: prompt, type DM and press ENTER. 2. Follow the onscreen instructions until you see the Select an Installation Option menu. 3. Select either (E)asy Disk Installation or (A)dvanced Disk Installation. Disk Manager lists all the hard drives that it detects. You should see your new Seagate drive and your existing hard drive, if any. If any hard drive is not recognized, exit Disk Manager and turn off your computer. Check all cables, jumpers and BIOS settings. Then start at step 1 to run Disk Manager again. 4. If Disk Manager recognizes all your drives, select the drive you want to install and press ENTER. Disk Manager partitions and formats the drive. Important. Carefully read the information provided by Disk Manager during installation. Important instructions regarding booting from your A: drive will be provided if Disk Manager determines that your BIOS needs support for drive capacities greater than 8.4 Gbytes.