Seagate ST800FM0012 Pulsar.2 SAS Product Manual - Page 44
Seagate ST800FM0012 Manual
View all Seagate ST800FM0012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
7.5.4.1 Shock a. Operating-normal The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding: • 1000 Gs at a maximum duration of 0.5ms (half sinewave) Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds. Note. This specification does not cover connection issues that may result from testing at this level. b. Non-operating The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives. The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation. • 1000 Gs at a maximum duration of 0.5ms (half sinewave) Shock may be applied in the X, Y, or Z axis. c. Packaged Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper drive placement. Figure 11. Recommended mounting Note. Image may not represent actual product, for reference only. 36 Pulsar.2 SAS Product Manual, Rev. B