Sennheiser EW 100 G4-835 Instruction manual ew 100 G4 PDF
Sennheiser EW 100 G4-835 Manual
View all Sennheiser EW 100 G4-835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser EW 100 G4-835 manual content summary:
- Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 1
evolution wireless G4 100 series Instruction Manual Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com ew 100 G4 - v2.2 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 2
Overview 6 ew 100 G4 series products 7 EM 100 G4 rack receiver 8 SKM 100 G4 handheld transmitter 9 SK 100 G4 bodypack transmitter 10 Accessories 11 Microphones and cables 12 Microphone modules 12 Headset and Lavalier microphones 12 Line/instrument cables 13 Rechargeable battery and charger 14 BA - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 3
a microphone to the SK 100 G4 39 Connecting an instrument or line source to the SK 100 G4 40 Attaching the bodypack transmitter to clothing 41 Installing Squelch menu item 70 Easy Setup menu item 72 Scan New List 72 Current List 73 Reset 73 Performing multi-channel frequency setup 73 Setting up a - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 4
SKM 100 G4-S only) 100 Advanced > Pilot Tone menu item 100 Advanced > LCD Contrast menu item 100 Advanced > Reset menu item 101 Advanced > Software Revision menu item 101 Using the SK 100 G4 102 Operating elements of the SK 100 G4 bodypack transmitter 103 Switching the SK 100 G4 bodypack transmitter - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 5
the RF signal with the ON/OFF button 108 Lock-off function 109 Displays on the SK 100 G4 bodypack transmitter display panel 110 Select a standard display 111 Buttons for navigating the SK 100 G4 menu 112 Navigating through the menu 112 Making changes in a menu item 112 Setting options in - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 6
AF characteristics 134 Overall device 135 SK 100 G4 136 RF characteristics 136 AF characteristics 136 Overall device 137 ASA 214 138 Specifications 138 Block diagram 139 Pin assignment 140 3.5 mm stereo jack plug - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 7
You can find information about the individual products in the ew 100 G4 series under "ew 100 G4 series products". For information about the available accessories, see "Accessories". You can find information about the ew 100 G4 series frequency bank system under "The frequency bank system". 6 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 8
can find technical specifications about the individual products un- der "Specifications". • You can find information about installing the products under "Installing and starting up ew 100 G4 series devices". • You can find information about operating the products under "Using ew - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 9
EM 100 G4 rack receiver ► You can find more detailed information about the EM 100 G4 in the following sections: • Installation and Startup: "Installing the EM 100 G4" • Operation: "Using the EM 100 G4" • Technical Data: "EM 100 G4" 8 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 10
SKM 100 G4 handheld transmitter ► SKM 100 G4 variant: ► SKM 100 G4-S variant: ► The SKM 100 G4 handheld transmitter is also available in the SKM 100 G4S variant with an integrated mute switch. You can find more detailed information about the SKM 100 G4 in the following sections: • Installation and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 11
SK 100 G4 bodypack transmitter ► You can find more detailed information about the SK 100 G4 in the following sections: • Installation and Startup: "Installing the SK 100 G4" • Operation: "Using the SK 100 G4" • Technical Data: "SK 100 G4" 10 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 12
Accessories Accessories A variety of accessories are available for the ew 100 G4 series. 11 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 13
microphone modules on their respective product pages at www.sennheiser.com. Headset and Lavalier microphones We recommend using the following Lavalier microphones and headset microphones with the SK 100 G4 bodypack transmitter. ► Microphone Features Article no. ME 2-II Lavalier microphone - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 14
The following cables are available to connect instruments and line sources to the SK 100 G4 bodypack transmitter: • Sennheiser CL 2 Line cable with XLR-3F plug on lockable 3.5 mm jack plug, article no. 004840 ► • Sennheiser Ci 1-N Guitar cable with 6.3 mm jack plug on lockable 3.5 mm jack plug - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 15
and charger BA 2015 rechargeable battery The BA 2015 rechargeable battery is designed for use with evolution wireless G4 series handheld transmitters, bodypack transmitters and bodypack receivers. Article no. 009950 ► L 2015 charger The BA 2015 rechargeable battery can be charged in the L 2015 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 16
Accessories LA 2 charging adapter Charging adapter for L 2015 charger for charging SKM G4 handheld transmitters with installed BA 2015 rechargeable battery. Article no. 503162 ► 15 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 17
Accessories Accessories for rack mounting GA 3 rack mount kit 19" rack adapter for mounting the EM 100 G4, EM 300-500 G4 or SR IEM G4 in a 19" rack. Article no. 503167 ► AM 2 antenna front mounting kit Antenna front mounting kit for installing antenna connections on the front of the rack - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 18
, frequency range GB, article no. 504680 • AB 3-K variant, frequency range K, article no. 505550 • AB 3-1G8 variant, frequency range 1G8, article no. 504915 Antenna cables • GZL 1019, BNC/BNC coaxial cable, antenna cable with 50 Ω character- istic (wave) impedance • GZL 1019-A1 variant, 1 m (3 ft - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 19
Accessories Additional accessories Color labeling set • KEN 2, color labeling set for SKM handheld transmitters, article no. 530195 ► Microphone clamp • MZQ 1, microphone clamp for SKM handheld transmitters, article no. 076670 ► 18 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 20
frequency ranges in the UHF band available for transmission. The following frequency ranges are available for the ew 100 G4 series: • A1 range: 470 - 516 MHz • A range: 516 - 558 MHz • AS range: 520 - 558 MHz • G range: 566 - 608 MHz • GB range: 606 - - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 21
about installing and connecting ew 100 G4 series devices in the following sections. • EM 100 G4 rack receiver >> "Installing the EM 100 G4" • SKM 100 G4(-S) handheld transmitter >> "Installing the SKM 100 G4" • SK 100 G4 bodypack transmitter >> "Installing the SK 100 G4" • ASA 214 antenna splitter - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 22
Installing the EM 100 G4 Installing the EM 100 G4 These sections contain detailed information about installing and starting up the EM 100 G4. You can find information about operating the EM 100 G4 under "Using the EM 100 G4". 21 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 23
on the rear of the device Product overview for the rear side of the EM 100 G4 ► 1 Strain relief for the cable of the power supply unit • See "Connecting/disconnecting the EM 100 G4 to/from the power supply system" 2 Connecting cables for the power supply unit (DC IN) • See "Connecting/disconnecting - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 24
grip. ▷ Slide the supplied country adapter onto the power supply unit. ▷ Plug the power supply unit into the wall socket. To completely disconnect the EM 100 G4 from the power supply system: ▷ Unplug the power supply unit from the wall socket. ▷ Unplug the power supply unit from the DC IN socket of - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 25
network You can cascade multiple EM 100 G4s to a multi-channel system using the two DATA RJ-10 interfaces (up to 12 receivers). You can perform a frequency setup for the entire multi-channel system via this data network using the Easy Setup function. The setup only works when all of the receivers - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 26
Installing the EM 100 G4 Setting up a multi-channel system with more than 12 receivers You can use the Easy Setup function to automatically set up a maximum of 12 receivers. If you assign the frequencies manually, however, you can use up to 20 receivers in a multi-channel system (not possible in the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 27
Installing the EM 100 G4 Outputting audio signals The EM 100 G4 has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket. : ▷ Plug the XLR cable into the AF OUT BAL socket of the EM 100 G4. To connect a jack cable: ▷ Plug the jack cable into the AF OUT UNBAL socket of the EM - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 28
: ▷ Connect the first rod antenna to the ANT I socket on the rear side of the EM 100 G4. ▷ Connect the second rod antenna to the ANT II socket on the rear side of the EM 100 G4. ▷ Gently angle the rod antennas to the left and right as shown in the fig- ure. If - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 29
sure that the ambient temperature within the rack does not ex- ceed the permissible temperature limit specified in the specifications. See "EM 100 G4". ▷ Ensure sufficient ventilation; if necessary, provide additional ventilation. ▷ Make sure that the mechanical loading of the rack is even. ▷ When - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 30
Installing the EM 100 G4 Mounting a single receiver in a rack To mount the receiver in a rack, you will need the GA 3 rack mounting kit (optional accessory). To fasten the mounting - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 31
Installing the EM 100 G4 Mounting two receivers side by side in a rack When you mount two receivers side by side both receivers upside down and side by side on an even surface. ▷ Secure the jointing plate to the transmitters using the six recessed head screws (M3x6). ▷ Secure the mounting angle. ► 30 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 32
Installing the SKM 100 G4 Installing the SKM 100 G4 These sections contain detailed information about installing and starting up the SKM 100 G4. You can find information about operating the SKM 100 G4 under "Using the SKM 100 G4". 31 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 33
Installing the SKM 100 G4 Inserting and removing the batteries/rechargeable batteries You can operate the wireless microphone either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Screw the rear part of the wireless microphone in the direction of the arrow (counter - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 34
Battery status Charge status of the batteries: ► Installing the SKM 100 G4 Charge status is critical (LOW BATT): ► 33 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 35
Installing the SKM 100 G4 Replacing the microphone module You can find a list of the recommended microphone modules for the handheld transmitter under "Microphones and cables". To change the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ► Do not touch - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 36
Installing the SKM 100 G4 Changing the colored ring To change the colored ring: ▷ Pull the colored ring off as shown in the diagram. ► ▷ Attached a colored ring in the color you want as shown in the diagram. ► 35 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 37
Installing the SK 100 G4 Installing the SK 100 G4 These sections contain detailed information about installing and starting up the SK 100 G4. You can find information about operating the SK 100 G4 under "Using the SK 100 G4". 36 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 38
Installing the SK 100 G4 Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 2015 battery. ▷ Press the two catches and open the battery compartment cover. ▷ Insert the batteries - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 39
Battery status Charge status of the batteries: ► Installing the SK 100 G4 Charge status is critical (LOW BATT): ► 38 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 40
Installing the SK 100 G4 Connecting a microphone to the SK 100 G4 You can find a list of recommended Lavalier and headset microphones for the bodypack transmitter under "Microphones and cables". To connect a microphone to the bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the MIC/ - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 41
or line source to the SK 100 G4 You can connect instruments or audio sources with a line level to the bodypack transmitter. To do this, you will need the Ci 1-N (6.3 mm jack plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on lockable 3.5 mm jack plug) Sennheiser cables. To connect an - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 42
Installing the SK 100 G4 Attaching the bodypack transmitter to clothing You can use the belt clip to attach the bodypack transmitter to your waistband or on a guitar strap. The belt clip is detachable so that you can also attach the bodypack transmitter with the antenna pointing downwards. To do so, - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 43
Installing the ASA 214 Installing the ASA 214 These sections contain detailed information about installing and starting up the ASA 214. You can find information about operating the ASA 214 under "Using the ASA 214". 42 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 44
the receiver • See "Connecting receivers to the ASA 214" 5 ANT RF IN A BNC socket • Antenna input of diversity branch A • See "Connecting antennas" 6 4 BNC sockets A1 to A4 • RF outputs of diversity branch A for connection to the receiver • Every one of these RF outputs can also provide voltage to - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 45
Installing the ASA 214 Connecting/disconnecting the ASA 214 to/from the power supply system To supply power to the ASA 214, the connected receivers and any antenna amplifiers used, you will need the NT 1-1 power supply unit. Only use the supplied NT 1-1 power supply unit. It is designed for your - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 46
to four stationary receivers to the ASA 214. Sennheiser receivers of the ew G4 and ew G3 series can also be supplied with power from the ASA 214. The following receivers are compatible: evolution wireless G4: • EM 100 G4 • EM 300-500 G4 evolution wireless G3: • EM 100 G3 • EM 300 G3 • EM 500 G3 2000 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 47
Connect one of the receiver's antenna inputs to one of the BNC sockets A1 to A4 using one of the supplied BNC cables. The compatible receivers listed above do not require their own power supply. They are powered via the BNC sockets A1 to A4. ▷ Connect the receiver's other antenna input to one of the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 48
Installing the ASA 214 Connecting antennas For more information about antennas and antenna accessories, see "Antennas and accessories". In order to ensure optimal reception even in the case of poor reception conditions, we recommend using remote antennas. Connecting remote antennas ▷ Mount two - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 49
214 1800 - 1G8 MHz (AB 3) 0 4 m 8 m 1 16 m 36 m 2 28 m 64 m Use the AB 3 for the following frequency ranges: • A1 range: 470 - 516 MHz • A range: 516 - 558 MHz • G range: 566 - 608 MHz • GB range: 606 - 648 MHz • B range: 626 - 668 MHz • C range: 734 - 776 MHz • D range: 780 - 822 MHz • TH - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 50
• Aw+ range: 470 - 558 MHz • Gw range: 558 - 626 MHz • GBw range: 606 - 678 MHz • Bw range: 526 - 698 MHz • Cw range: 718 - 790 MHz • Dw range: 790 - 865 MHz Installing the ASA 214 49 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 51
Installing the ASA 214 Configuring multi-channel systems The following options for connecting multi-channel systems are possible: Option 1: Two antennas supply a 4-channel system 50 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 52
Installing the ASA 214 Option 2: Two 4-channel systems are interconnected Option 3: Two antennas supply a 8-channel system 51 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 53
Installing the ASA 214 Installing the ASA 214 in a rack CAUTION Rack mounting poses risks When installing the device in a closed or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical loading and the electrical potentials will be different from those - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 54
Installing the ASA 214 Mounting a single antenna splitter in a rack To mount the antenna splitter in a rack, you will need the GA 3 rack mounting kit (optional accessory). To fasten the mounting angle of the GA 3 rack mounting kit: ▷ Unscrew and remove the two recessed head screws (M4x8) on each - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 55
Installing the ASA 214 ▷ Attach the antennas. You have the following options: • Connect the supplied rod antennas on the rear side of the antenna splitter. In this case, cover the antenna holes with the two covers (left diagram). • Attach the AM 2 antenna front mounting set (optional accessory) and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 56
3 rack mounting kit (optional accessory): ▷ Place both antenna splitters upside down and side by side on an even surface. ▷ Secure the jointing plate to the transmitters using the six recessed head screws (M3x6). ▷ Secure the mounting angle. ► 55 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 57
can find information about using ew 100 G4 series devices in the following sections. • EM 100 G4 rack receiver >> "Using the EM 100 G4" • SKM 100 G4(-S) handheld transmitter >> "Using the SKM 100 G4" • SK 100 G4 bodypack transmitter >> "Using the SK 100 G4" • ASA 214 antenna splitter>> "Using the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 58
the menu of the receiver >> "Displays on the EM 100 G4 display panel" • Using the menu of the handheld transmitter >> "Displays on the SKM 100 G4 handheld transmitter display panel" • Using the menu of the bodypack transmitter >> "Displays on the SK 100 G4 bodypack transmitter display panel" 57 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 59
Using the EM 100 G4 Using the EM 100 G4 These sections contain detailed information about using the EM 100 G4. You can find information on installation and startup of the EM 100 G4 under "Installing the EM 100 G4". 58 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 60
interface with a blue LED • See "Synchronizing devices" 2 Display panel • See "Displays on the EM 100 G4 display panel" 3 UP/DOWN buttons • See "Buttons for navigating through the menu" 4 SYNC button • See "Synchronizing devices" 5 ESC button • See "Buttons for navigating through the menu" 6 SET - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 61
Using the EM 100 G4 Switching the EM 100 G4 on and off To switch the receiver on: ▷ Short-press the STANDBY button. The receiver switches on and the Receiver Parameters standard display appears. ► To - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 62
Using the EM 100 G4 Muting the audio output To mute the audio signal of the receiver: ▷ Short-press the STANDBY button in one of the standard displays. The RX - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 63
Using the EM 100 G4 Lock-off function You can set the automatic lock-off function in the Auto lock menu (see "Auto Lock menu item"). When you have switched - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 64
use to configure all of the settings. • See "Setting options in the menu". Buttons for navigating through the menu To navigate through the EM 100 G4 operating menu, you need the following buttons. ► ► Short-press the ESC button • Cancels the entry and returns to the previous display Long-press the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 65
Using the EM 100 G4 ► Press the SET button • Changes from the current standard display to the operating menu • Calls up a menu item • Changes to a submenu • Stores the settings and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 66
Using the EM 100 G4 Home screen After you switch on the receiver, the display panel initially displays the Sennheiser logo. After a short level of the received transmitter When the display shows full deflection, the audio input level is excessively high. When the transmitter is overloaded frequently - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 67
is muted • See "Muting the audio output" 8 Battery status of the transmitter • SKM 100 G4: see "Inserting and removing the batteries/rechargeable batteries" • SK 100 G4: see "Inserting and removing the batteries/rechargeable batteries" 9 Lock-off function • Lock-off function is activated on - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 68
transmitter, adjust the audio level as high as possible without the display for the audio level showing full deflection (AF Max is at a level with the PEAK display). See "AF Out menu item". Guitar Tuner standard display The Guitar Tuner standard display shows the guitar tuner (only for the SK 100 G4 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 69
Setting options in the menu In the EM 100 G4 menu, you can configure the following settings. Adjusting the squelch threshold ▷ See "Squelch menu item" Scanning for unused frequency presets, releases and selects frequency presets ▷ See "Easy Setup menu item" Setting the frequency bank and the channel - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 70
Using the EM 100 G4 Menu structure The figure shows the complete EM 100 G4 menu structure in an overview. ► 69 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 71
Using the EM 100 G4 Squelch menu item You can adjust the squelch threshold in the Squelch menu item. Setting range: • Low >> 5 dBμV • Middle >> 15 dBμV • High >> 25 dBμV The - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 72
Using the EM 100 G4 To open the Squelch menu item: ▷ On the home screen, press the SET button to open the operating menu. ▷ Press the UP or DOWN button - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 73
Setup menu item. When you have connected multiple EM 100 G4 devices to a network via the RJ-10 interfaces (see "Creating a data network"), you can perform the frequency setup -channel frequency setup" used. Switch off all transmitters before you perform the scan. If transmitters are still switched - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 74
100 G4 ▷ Press the SET button to save your selection and synchronize the selected frequency with the transmitter at a later point (see "Synchronizing devices"). or ▷ Press the SYNC button to synchronize the selected frequency with the transmitter network". ▷ Open the Easy Setup menu item on one of - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 75
Using the EM 100 G4 ► 74 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 76
Using the EM 100 G4 Setting up a multi-channel system with more than 12 receivers You can use the Easy Setup function to automatically set up a maximum of 12 receivers. If you assign the frequencies manually, however, you can use up to 20 receivers in a multi-channel system (not possible in the JB, - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 77
Using the EM 100 G4 Frequency Preset menu item In the Frequency Preset menu item, you can adjust the receiving frequency of the receiver by adjusting the frequency bank and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 78
Using the EM 100 G4 Name menu item In the Name menu item you can enter a name for the radio link. To open the Name menu item: ▷ On the home - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 79
Using the EM 100 G4 AF Out menu item In the AF Out menu item, you can set the audio level that is output via the receiver audio outputs. Setting - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 80
Using the EM 100 G4 Equalizer menu item In the Equalizer menu item, you can change the frequency response of the output signal. You can reduce the bass range and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 81
Using the EM 100 G4 Auto Lock menu item In the Auto Lock menu item you can activate or deactivate the auto lockoff function. You can find information about temporarily - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 82
Using the EM 100 G4 Advanced menu item In the Advanced submenu you can configure enhanced settings. To open the Advanced submenu: ▷ On the home screen, press the SET button - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 83
Using the EM 100 G4 Advanced -> Tune menu item In the Tune menu item of the Advanced submenu, you can configure the receiving frequencies for the U frequency bank. You can - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 84
Using the EM 100 G4 Advanced -> Guitar Tuner menu item In the Guitar Tuner menu item of ► The pilot tone has an inaudible frequency that is sent from the transmitter and evaluated by the receiver. It supports the receiver's squelch function. For the best possible operational reliability, we - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 85
Using the EM 100 G4 Advanced -> LCD Contrast menu item In the LCD Contrast menu item of the Advanced submenu, you can adjust the display contrast of the display panel. ► - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 86
Using the SKM 100 G4 Using the SKM 100 G4 These sections contain detailed information about using the SKM 100 G4 and SKM 100 G4-S. You can find information on installation and startup of the SKM 100 G4 and SKM 100 G4-S under "Installing the SKM 100 G4". 85 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 87
, UP and SET multi-function switch • See "Buttons for navigating the SKM 100 G4 menu" 4 ON/OFF button with ESC function in the operating menu • Switch the transmitter on or off See "Switching the SKM 100 G4 handheld transmitter on and off" • Escape function in the menu See "Buttons for navigating - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 88
)" • See "Advanced > Mute Mode menu item (SKM 100 G4-S only)" Switching the SKM 100 G4 handheld transmitter on and off To switch on the SKM 100 G4: ▷ Hold down the ON/OFF button until the Sennheiser logo appears on the display. ► To switch off the SKM 100 G4: ▷ Hold down the ON/OFF button until the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 89
Using the SKM 100 G4 Muting the handheld transmitter (AF mute) SKM 100 G4 The audio signal of the transmitter cannot be muted. However, when you deactivate the RF signal no AF signal is output. See "Deactivating the RF signal (RF mute)". SKM 100 G4-S You can mute the audio signal by pressing the MIC - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 90
Using the SKM 100 G4 Deactivating the RF signal (RF mute) You can temporarily deactivate is not transmitting an RF signal. The transmission icon is not lit (see "Displays on the SKM 100 G4 handheld transmitter display panel"). To activate the RF signal: ▷ Short-press the ON/OFF button. RF Mute Off - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 91
set the automatic lock-off function in the Auto lock menu (see "Buttons for navigating the SKM 100 G4 menu"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate the lock-off function: ▷ Press - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 92
Using the SKM 100 G4 Displays on the SKM 100 G4 handheld transmitter display panel You can view the following information on the transmitter display. ► 1 AF audio level • Displays the audio level with peak hold function • See "Sensitivity menu item" 2 Frequency • Configured transmission frequency • - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 93
Using the SKM 100 G4 >> "Buttons for navigating the SKM 100 G4 menu" >> "Setting options in the menu" Select a standard display ▷ Move the multi-function switch to select a standard display: Frequency/Name standard display ► 548.100MHz ew100 G4 AF P MUTE Channel/Frequency standard display ► B.Ch: 20 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 94
DOWN buttons to navigate through the individual menu items. ▷ Press the SET button to open the selected menu item. "Operating elements of the SKM 100 G4 handheld transmitter" Making changes in a menu item After you open a menu item, you can make changes as follows: ▷ Press the UP or DOWN buttons to - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 95
options in the menu In the SKM 100 G4 menu, you can configure the following settings. Adjusting the input MIC button setting (SKM 100 G4-S only) • Activating/deactivating the pilot tone evaluation • Adjusting the contrast of the display panel • Resetting the transmitter • Displaying the current - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 96
Using the SKM 100 G4 Sensitivity menu item • Adjusting the input sensitivity - AF audio level ► Setting range: 0 dB to -48 dB in 6 dB steps. The AF audio level is also - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 97
Using the SKM 100 G4 Frequency Preset menu item • Manually selecting a frequency bank and channel ► While you work in the Frequency Preset menu, the RF signal is deactivated. Please note when creating multi-channel systems: - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 98
Using the SKM 100 G4 Auto Lock menu item • Switching the automatic lock-off function on and off ► This lock prevents the wireless microphone from being unintentionally switched off and also prevents any unintentional changes to the transmitter's configuration. In the current standard display, the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 99
"Advanced > Mute Mode menu item (SKM 100 G4-S only)" Activating/deactivating the pilot tone evaluation ▷ See "Advanced > Pilot Tone menu item" Adjusting the contrast of the display panel ▷ See "Advanced > LCD Contrast menu item" Resetting the transmitter ▷ See "Advanced > Reset menu item" Displaying - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 100
Using the SKM 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the wireless microphone to a system bank and you call up - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 101
100 G4 Advanced > Mute Mode menu item (SKM 100 G4-S only) • Configuring the function of the MIC button ► AF On/Off mode • When you press the MIC button, no audio signal is transmitted. Disabled mode • No function You can find information about the MIC button under "Muting the handheld transmitter - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 102
Advanced > Reset menu item • Resetting the wireless microphone ► Using the SKM 100 G4 When you reset the wireless microphone, only the selected settings of the pilot tone and the U frequency bank are retained. Advanced > Software Revision menu item • - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 103
Using the SK 100 G4 Using the SK 100 G4 These sections contain detailed information about using the SK 100 G4. You can find information on installation and startup of the SK 100 G4 under "Installing the SK 100 G4". 102 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 104
Using the SK 100 G4 Operating elements of the SK 100 G4 bodypack transmitter ► 1 Display panel • See "Displays on the SK 100 G4 bodypack transmitter display panel" 2 Operation and battery indicator, red LED • illuminated = ON See "Switching the SK 100 G4 bodypack transmitter on and off" • flashing = - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 105
RF signal (RF mute)" Switching the SK 100 G4 bodypack transmitter on and off ▷ Press the two catches and open the battery compartment cover. To switch on the SK 100 G4: ▷ Hold down the ON/OFF button until the Sennheiser logo appears on the display. To switch off the SK 100 G4: ▷ Hold down the ON/OFF - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 106
Using the SK 100 G4 Muting the bodypack transmitter (AF mute) You can deactivate the audio signal with the MUTE switch. To do this, the MUTE switch function must be configured to AF On/ - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 107
Using the SK 100 G4 Deactivating the RF signal (RF mute) You can deactivate the RF signal in two ways: Deactivating the RF signal with the MUTE switch You can - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 108
Using the SK 100 G4 ▷ Slide the MUTE switch to the MUTE position. The RF signal is deactivated. The message MUTE is shown in the display and the transmission icon no longer appears. 107 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 109
Using the SK 100 G4 Deactivating the RF signal with the ON/OFF button You can deactivate the RF signal with the ON/OFF button. To deactivate the RF signal: ▷ - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 110
can set the automatic lock-off function in the Auto lock menu (see "Buttons for navigating the SK 100 G4 menu"). When you have switched on the lock-off function, you will have to turn the transmitter off and on again in order to operate it. To temporarily deactivate the lock-off function: ▷ Press - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 111
Using the SK 100 G4 Displays on the SK 100 G4 bodypack transmitter display panel You can view the following information on the transmitter display. ► 1 AF audio level • Displays the audio level with peak hold function • See "Sensitivity menu item" 2 Frequency • Configured transmission frequency • - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 112
Using the SK 100 G4 >> "Buttons for navigating the SK 100 G4 menu" >> "Setting options in the menu" Select a standard display ▷ Press the UP or DOWN buttons to select a standard display. Frequency/Name standard display ► 548.100MHz ew100 G4 AF P MUTE Channel/Frequency standard display ► B.Ch: 20.12 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 113
DOWN buttons to navigate through the individual menu items. ▷ Press the SET button to open the selected menu item. "Operating elements of the SK 100 G4 bodypack transmitter" Making changes in a menu item After you open a menu item, you can make changes as follows: ▷ Press the UP or DOWN buttons to - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 114
Using the SK 100 G4 Setting options in the menu In the SK 100 G4 menu, you can configure the following settings. Adjusting the input evaluation • Adjusting the contrast of the display panel • Resetting the transmitter • Displaying the current software revision ▷ See "Advanced menu item" 113 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 115
Using the SK 100 G4 Sensitivity menu item • Adjusting the input sensitivity - AF audio level ► Setting range: 0 dB to -60 dB in 6 dB steps. The AF audio level is also displayed when the bodypack transmitter is muted, e.g. to check the sensitivity before a live broadcast. Recommended presets: • Loud - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 116
Name menu item • Entering names ► Using the SK 100 G4 In the Name menu item you can enter any name you want for the bodypack transmitters (e.g. the names of the musicians). The name can be shown in the Frequency/Name and Name/Channel standard displays. The names are a maximum of 8 characters: • - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 117
Using the SK 100 G4 Advanced menu item In the Advanced submenu you can configure enhanced Adjusting the contrast of the display panel ▷ See "Advanced > LCD Contrast menu item" Resetting the transmitter ▷ See "Advanced > Reset menu item" Displaying the current software revision ▷ See "Advanced > - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 118
Using the SK 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the bodypack transmitter to a system bank and you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 119
Using the SK 100 G4 Advanced > Mute Mode menu item • Configuring the MUTE switch ► AF On Disabled mode • No function You can find information about operating the mute switch under "Muting the bodypack transmitter (AF mute)" and "Deactivating the RF signal (RF mute)". Advanced > Cable Emulation menu - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 120
Using the SK 100 G4 Advanced > Pilot Tone menu item • Activating/deactivating pilot tone transmission ► The pilot tone has an inaudible frequency that is sent from the transmitter and evaluated by the receiver. It supports the receiver's squelch function. Advanced > LCD Contrast menu item • - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 121
menu item") and synchronize it with the transmitter (see "Synchronizing devices"). 3. Set the frequency on the receiver and the transmitter manually (EM 100 G4: "Frequency Preset menu item", SKM 100 G4: "Frequency Preset menu item", SK 100 G4: "Frequency Preset menu item") Setting notes Please - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 122
100 G4 series transmitters and receivers via the receiver's infrared interface. The following Parameters are transferred to the transmitters synchronize the devices: ▷ Switch the transmitter and the receiver on. ▷ Press the SYNC button on the receiver. Sync appears in the receiver's display and the - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 123
devices of the SKM 100 G4 handheld transmitter" and "Operating elements of the SK 100 G4 bodypack transmitter") in front of the infra-red interface of the receiver (see "Operating elements on the front of the device"). The parameters are transferred to the transmitter. The blue LED blinks - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 124
Using the ASA 214 Using the ASA 214 These sections contain detailed information about operating the ASA 214. You can find information on installation and startup of the ASA 214 under "Installing the ASA 214". 123 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 125
Using the ASA 214 Operating elements on the front of the device ► 1 STANDBY button • See "Switching the ASA 214 on and off" 2 LED: Operation indicator 124 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 126
turns off. The connected antenna amplifiers are switched off. Connected receivers are switched off if they draw their supply voltage from the BNC sockets A1 to A4 (see "Connecting receivers to the ASA 214"). To fully switch off the antenna splitter: ▷ Disconnect the antenna splitter from the power - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 127
Overview SPECIFICATIONS Overview In the sections below, you can find information about the different variants of the products in the ew 100 G4 series as well as technical data for the individual products. • Product variants and frequency variants >> "Product variants" • Frequency tables with - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 128
Product variants Product variants EM 100 G4 product variants Made in Germany ► EM 100 G4-A1 EM 100 G4-A EM 100 G4-GB EM 100 G4-G EM 100 G4-B EM 100 G4-C EM 100 G4-E EM 100 G4-1G8 EM 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 MHz 734 - 776 MHz 823 - 865 MHz 1785 - - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 129
. 507597 Art. no. 507598 Art. no. 507599 Art. no. 507600 Art. no. 507601 Art. no. 507602 SKM 100 G4 ► SKM 100 G4-A1 SKM 100 G4-A SKM 100 G4-GB SKM 100 G4-G SKM 100 G4-B SKM 100 G4-C SKM 100 G4-E SKM 100 G4-1G8 SKM 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - 668 MHz 734 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 130
Art. no. 508004 Art. no. 508005 Art. no. 508006 Art. no. 508007 Art. no. 508008 SK 100 G4 product variants Made in Germany ► SK 100 G4-A1 SK 100 G4-A SK 100 G4-GB SK 100 G4-G SK 100 G4-B SK 100 G4-C SK 100 G4-E SK 100 G4-1G8 SK 100 G4-K+ 470 - 516 MHz 516 - 558 MHz 606 - 648 MHz 566 - 608 MHz 626 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 131
Frequency tables Frequency tables You can find frequency tables for all available frequency ranges in the download section of the Sennheiser website uneer www.sennheiser.com/ download. Download area of the Sennheiser website Enter ew G4 into the search bar to show the frequency tables. 130 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 132
Specifications Specifications You can find product-specific technical data in the sections below. 131 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 133
EM 100 G4 RF characteristics ► Modulation Receiving frequency ranges Receiving selection Intermodulation attenuation Blocking Squelch Pilot tone squelch Antenna inputs Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 134
4: High Boost Signal-to-noise ratio (1 mV, peak deviation) Total harmonic distortion (THD) AF output voltage (at peak deviation, 1 kHz AF) AF OUT setting range Sennheiser HDX -3 dB at 180 Hz -3 dB at 180 Hz +6 dB at 10 kHz +6 dB at 10 kHz ≥ 110 dBA ≤ 0.9 % 6.3 mm jack socket (unbalanced): +12 dBu - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 135
100 G4 RF characteristics ► Modulation Receiving frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 ? Pilot tone squelch Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB Sennheiser - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 136
Overall device ► Temperature range Power supply Nominal voltage Power consumption at nominal voltage with transmitter switched off Operating time Dimensions Weight (with batteries) -10 °C to +55 °C (14 °F to 131 °F) 2 AA batteries, 1,5 V or BA 2015 accupack 3 V battery / 2.4 V rechargeable battery - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 137
SK 100 G4 RF characteristics ► Modulation Receiving frequency ranges Transmission frequencies Switching bandwidth Nominal/peak deviation Frequency stability RF output power at 50 ? Pilot tone squelch Wideband FM A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB Sennheiser - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 138
Overall device ► Temperature range Power supply Nominal voltage Power consumption at nominal voltage with transmitter switched off Operating time Dimensions Weight (with batteries) -10 °C to +55 °C (14 °F to 131 °F) 2 AA batteries, 1,5 V or BA 2015 accupack 3 V battery 2.4 V rechargeable battery - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 139
, 50 cm, BNC ASA 214-UHF: ASA 214-1G8: Amplification 470 - 870 MHz at -3 dB 1785 - 1805 MHz at -3 dB In A - Out A In A - Out A1 ... A4 In B - Out B1 ... B4 IIP3 Impedance Reflection loss Operating voltage Power consumption Total power consumption Antenna amplifier power supply at ANT RF IN A and - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 140
Block diagram 139 - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 141
Plug for lavalier and headset microphone, e.g. ME 2. • Connect to: • SK 100 G4 • SK 300 G4 • SK 500 G4 3.5 mm line jack plug ► Line + • Plug for line and instrument cables, e.g. Ci 1-N • Connect to: • SK 100 G4 • SK 300 G4 • SK 500 G4 6.3 mm stereo jack plug, balanced (audio in/loop out) ► • Connect - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 142
6.3 mm mono jack plug, unbalanced ► • Connect to: • EM 100 G4 Audio Out • EM 300-500 G4 Audio Out 6.3 mm stereo jack plug for headphone jack ► LR • Connect to: • EM 100 G4 headphone input • EM 300-500 G4 headphone input • SR IEM G4 headphone input XLR-3 plug, balanced ► 21 3 Hollow jack plug for - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 143
the following information when cleaning and maintaining evolution wireless G4 series products. CAUTION Liquids can damage the products' products only with a soft, dry cloth. ▷ Note the special cleaning instructions below for the following products. Cleaning the sound inlet basket of the microphone - Sennheiser EW 100 G4-835 | Instruction manual ew 100 G4 PDF - Page 144
Cleaning and maintenance ▷ Screw the sound inlet basket back onto the microphone module. From time to time, you should also clean the microphone module contacts: ▷ Wipe the contacts of the microphone module with a soft, dry cloth. 143
evolution wireless G4
100 series
Instruction Manual
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
ew 100 G4 - v
2
.
2