Sennheiser EW 100 G4-835 Instruction manual ew 100 G4 PDF - Page 73
Easy Setup menu item, Scan New List, Easy Setup
View all Sennheiser EW 100 G4-835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Using the EM 100 G4 Easy Setup menu item You can scan for unused frequencies using the Easy Setup menu item. When you have connected multiple EM 100 G4 devices to a network via the RJ-10 interfaces (see "Creating a data network"), you can perform the frequency setup for all of the connected receivers. You can find more information about connecting multiple devices under "Performing multi-channel frequency setup" used. Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually available cannot then be The squelch threshold setting influences the result. Set the squelch threshold to Low for as many frequencies as possible, and to High for as many safe frequencies as possible (see "Squelch menu item"). To open the Easy Setup menu item: ▷ On the home screen, press the SET button to open the operating menu. ▷ Press the UP or DOWN button until the Easy Setup menu item appears in the selection frame. ▷ Press the SET button to open the menu item. Scan New List ▷ Select Scan New List to scan for unused frequencies. ▷ Press the SET button to start the scan. The frequency range of the receiver is scanned. As a result, the number of unused frequencies is displayed for every frequency bank. ▷ Press the UP or DOWN buttons to select a frequency bank. ▷ Press the SET button to confirm your selection. ▷ Press the UP or DOWN buttons to select an unused frequency from the selected bank. 72