Sennheiser EW 100 G4-835 Instruction manual ew 100 G4 PDF - Page 100
Advanced > Tune menu item, Only adjusting the frequency, Setting the channel and frequency
View all Sennheiser EW 100 G4-835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Using the SKM 100 G4 Advanced > Tune menu item • Configuring the transmission frequency and frequency bank U When you have configured the wireless microphone to a system bank and you call up the Tune menu item, channel 1 of the frequency bank U is automatically set. The message U.1 briefly appears in the display. In the factory settings, the channels of the frequency bank U are not assigned to any transmission frequency. While you work in the Tune menu, the RF signal is deactivated. You can configure a transmission frequency for the current channel or select a channel in the frequency bank U and configure a transmission frequency for this channel in the Tune menu. Be sure to note the information on frequency selection, see "Setting notes". Only adjusting the frequency To configure the transmission frequency for the current channel: ▷ Open the Tune menu item in the Advanced menu. The frequency selection appears. ► ▷ Configure the desired frequency. ▷ Press the multi-function switch. Your settings will be saved. You are now back in the operating menu. Setting the channel and frequency To select a channel and assign it a frequency: ▷ Move the multi-function switch until the Tune menu item appears. ▷ Hold down the multi-function switch until the frequency bank selection appears. ► ▷ Set the desired channel. ▷ Press the multi-function switch. The frequency selection appears. ▷ Configure the frequency. 99