Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for copier) - Page 29

Recalling a job program 1 Press the [#/P] key. JOB PROGRAM MEMORY 2 Touch the desired storage register number key to recall the job from memory. JOB PROGRAMS PRESS PROGRAM NUMBER. 1 2 3 6 7 8 RECALL When a number key is touched, the selection screen will be closed and the stored job program will be recalled. A number for which no job program has been stored cannot be selected. 3 Set the number of copies as needed and press the [START] key. Copying will start with the settings of the recalled job program. Deleting a stored job program 1 Follow steps 1 and 2 in "Storing a job program" on the previous page. 2 Select a storage register number of the program to be deleted. EXIT If a number key for which no job program has been stored is selected, the 3 4 5 screen will change to the 8 9 10 screen of step 4 on the STORE/DELETE previous page (for storing a program). The message "TO STORE, SELECT AND PRESS [OK]. TO DELETE, PRESS [CANCEL]." will appear. When [CANCEL] is pressed, the screen will return to the selection screen shown to the left. 3 Touch the [DELETE] key. A JOB PROGRAM HAS BEEN ALREADY STORED. STORE ANOTHER PROGRAM? CANCEL REC LL DELETE STORE STORE/DELETE When the [DELETE] key is touched, the screen in step 2 will return and the program will be deleted. If the [CANCEL] key is touched, the screen in step 2 will return but the program will not be deleted. If no other programs are to be deleted, touch the [EXIT] key on the screen displayed in step 2 to exit the job program mode. 27