Sharp DK-CL5P DK-CL5P Operation Manual - Page 12

DK-CL5P Remote control ■ Battery installation This product contains a CR Coin Lithium Battery which contains Perchlorate Material - special handling may apply. California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/ Note: Before using remote control, please remove plastic shield at battery holder. 1 Whilst pushing the locking tab towards the center of the remote control, slide out the battery holder. Remote control Plastic shield Back of remote control Preparation for Use Battery holder Locking tab 2 Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control. Battery holder Positive (+) side up Polarity(+) symbol Battery type Locking tab Precautions for battery use: ● Remove the battery if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. Caution: ● Do not use rechargeable battery (nickel-cadmium battery, etc.). ● Danger of explosion if battery is incorrectly replaced. ● Replace only with the same or equivalent type. ● Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. ● Installing the battery incorrectly may cause the unit to malfunction. Notes concerning use: ● Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase "CR 2025" 3 V, coin lithium battery. ● Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. ● Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs. ● Keep the remote control away from moisture, heat, shock, and vibrations. 12