Sharp DK-CL5P DK-CL5P Operation Manual - Page 28

References DK-CL5P Troubleshooting chart (continued) ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. ■ If problem occurs When this product is subject during operation to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, remove the backup batteries. ■ Clearing all the memory (reset) During standby mode, press and hold SNOOZE/DIMMER button for 5 seconds. Display will become blank for a while and main unit will reset. Caution: This operation will erase all data stored in memory including clock, alarm settings and tuner preset. ■ Before transporting the unit Undock the iPod or iPhone and remove the USB/SD card from the unit. Then, set the unit to the power standby mode. Carrying the unit with iPod or iPhone left docked or USB/SD card unremoved might damage the systems. Maintenance ■ Cleaning the unit Periodically wipe the unit with a clean soft cloth. Caution: ● Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the unit finishing. ● Do not apply oil to the inside of the unit. It may cause malfunctions. 28