Sharp DX-C310 DX-C310 DX-C3400 Operation Manual - Page 131
Enter the original size.
View all Sharp DX-C310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
COPIER (1) (2) Enter the original size. 3 (3) BACK OK (1) Enter the X (horizontal) dimension of the original. Select either of the keys with the keys and press the [OK] key repeatedly to change the number. A dimension from 1" to 14" (25 mm to 356 mm) can be entered. (2) Enter the Y (vertical) dimension of the original. Select either of the keys with the keys and press the [OK] key repeatedly to change the number. A dimension from 1" to 8-1/2" (25 mm to 216 mm) can be entered. (3) Select the [Basic Menu] key. The stored original size will be retained even if the main power is turned off. To cancel the operation... Press the [CLEAR ALL] key ( ). 2-31 Contents
2-31
COPIER
Contents
3
Enter the original size.
(1)
Enter the X (horizontal) dimension of the
original.
Select either of the
keys with the
keys and
press the [OK] key repeatedly to change the number.
A dimension from 1" to 14" (25 mm to 356 mm) can be
entered.
(2)
Enter the Y (vertical) dimension of the
original.
Select either of the
keys with the
keys and
press the [OK] key repeatedly to change the number.
A dimension from 1" to 8-1/2" (25 mm to 216 mm) can be
entered.
(3)
Select the [Basic Menu] key.
The stored original size will be retained even if the main power is turned off.
To cancel the operation...
Press the [CLEAR ALL] key (
).
OK
BACK
(3)
(1)
(2)