Sharp DX-C310 DX-C310 DX-C3400 Operation Manual - Page 189

COPIER ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust) This feature is used to strengthen or weaken any one of the three color components R (red), G (green), or B (blue). R(Red)+ G(Green)+ B(Blue)+ Keys in the display can be selected with the arrow keys and the [OK] key. Place the original. 1 Place the original face up in the document feeder tray, or face down on the document glass. After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-28) Select the special modes. (1) Select the [Special Modes] key. 2 (2) Select the [Color Adjustments] key. (3) Select the [RGB Adjust] key. ☞ [Color Adjustments] KEY (page 2-88) (1) 3 (3) (2) BACK OK Adjust red, green, or blue. (1) Select the key of the color that you wish to adjust: [R (Red)], [G (Green)], or [B (Blue)]. Only one color can be adjusted. (If you adjust one color and then adjust another color, the adjustment of the first color is canceled.) (2) Adjust the selected color. To strengthen the selected color, select the [+] key and press the [OK] key. To weaken the selected color, select the [-] key and press the [OK] key. (3) Select the [Special Modes] key. You will return to the special modes screen. Press the [BACK] key to return to the base screen of copy mode. Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort 4 mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then select the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel an RGB adjust setting... Select the [Cancel] key in the screen of step 3. 2-89 Contents